5 OPERATION
5
OPERATION
5.1
Overview
General safety regulations for handling the equipment can be found in the chapter
"Safety". Read it through before you start the equipment.
NOTE!
When moving the equipment use intended handle. Never pull the cables.
WARNING!
Electric shock! Do not touch the workpiece or the welding head during operation!
5.2
Connections and control devices
1.
User interface, see chapter CONTROL
PANEL.
2.
Connection (+): TIG: Return cable
MMA: Welding cable or return cable
3.
Gas supply output
4.
TIG torch trigger
5.
Connection (-): TIG: torch MMA: Return
cable or welding cable
6.
Connection for remote control unit
(Both digital and analogue remote
control units can be used together with
the power source.)
0463 416 101
7.
Gas supply input
8.
Mains power supply switch, O/I
9.
USB connection
10.
Connection for cooling unit
11.
Mains cable
- 17 -
© ESAB AB 2022