E10000D9 - HP XP User Manual

◦
5) Confirm whether the pool number (Data pool/THP pool/Fast Snap pool number)
specified with the setup file is a pool for the Snapshot pair creation corresponding to
the disk array system.
◦
6) Confirm that a pool for the Snapshot pair creation corresponding to the disk array
system is set, and set if not. Expand the capacity if there is insufficient space for the
data pool.
[XP7]
◦
1) In the case of virtual DKC which straddles multiple physical DKCs, confirm that the
pool number specified in the configuration file exists in each physical DKC.
◦
2) If the pool of the pool number which was identical with the each physical DKC has
not been set, set the pool.
(2) An error occurred when an operation command was given to the disk array system.
See "About errors attributable to disk array systems" (page

E10000D9

Message
Failed to create Snapshot pair for P-Vol: [LU number of P-VOL] V-Vol: [LU number of V-VOL].
Explanation
Cannot create Snapshot pair.
Recommended action
(1) Perform the following using Storage Management Software:
[XP P9500/XP7]
◦
1) If Snapshot P.P is not valid, make it valid. (See Table 3.3-2)
◦
2) Delete any Snapshot pairs which are not used when the number of Snapshot pairs
has reached the maximum.
◦
3) Delete any V-VOLs which are not used when the number of V-VOLs has reached
the maximum.
◦
4) Delete any host groups which are not used when the number of host groups in the
disk array system has reached the maximum.
◦
5) Confirm whether the pool number (Data pool/THP pool/Fast Snap pool number)
specified with the setup file is a pool for the Snapshot pair creation corresponding to
the disk array system.
◦
6)Confirm that a pool for the Snapshot pair creation corresponding to the disk array
system is set, and set if not. Expand the capacity if there is insufficient space for the
data pool.
◦
7) When a host group name:? HP-VSS-HG does not exist, create HP-VSS-HG.
◦
8) Confirm that the target LU is not a LUSE volume (LUSE volumes are unsupported).
◦
9) Overloaded process may be performed on the disk array system. Confirm the status
of the disk array system and retry after some time.
133).
Error messages 91