Table of Contents
Advertisement
E1000151
Message
Failed to log into the iSCSI target. Error: [Error code].
Explanation
Connection to a target failed.
Recommended action
Invalidate CHAP authentication using Storage Management Software.
E100015C
Message
Configuration file [configuration file name] access denied. Config file is read-only.
Explanation
Access to the setup file failed.
Recommended action
Check the file attributes of the setup file. Confirm that it is not read-only and has the access
permission.
E100015D
Message
Failed to open configuration file: [configuration file name]
Explanation
Because the setup file was opened by another application, it could not be updated.
Recommended action
Close the setup file and re-execute.
E2002003
Message
AddStorage failed. Password protection is enabled.
Explanation
Because the Password Protection function is valid, registration of a disk array system failed.
Recommended action
Confirm the valid/invalid setting of the Password Protection function of the disk array system
which was specified using Storage Management Software. If it is valid, change it to invalid.
E2002004
Message
Invalid input value in serial number, username or password.
Explanation
The input values of a serial number, a user name, and a password are invalid.
102 Troubleshooting
Advertisement
Table of Contents
