Table of Contents
Advertisement
E1000063
Message
Logged in user does not have Storage Administrator privilege to the storage - Serial Number[serial
number]
Explanation
The user does not have Storage Administrator privilege.
Recommended action
When you use Account Authentication function, confirm that Storage Administrator (View and
Modify) authority is assigned to a user account by using Storage Management Software. Assign
it if not.
E1000064
Message
Failed to call DF_CheckLogin with SNM API. Error:[ Error code]. IP:[IP address/IP address] Serial
Number:[ serial number]
Explanation
Failed to login the disk array system.
Recommended action
(1)When it falls under the following cases, you may ignore this message.
◦
1)When registering the disk array system with no registration history for the first time
◦
2)After registration of the disk array system, when you delete utlprm.inf, utlprm2.inf, and
utlprm3.inf, from the installation folder of VSS Provider, and use VSS Provider
(2)Delete utlprm.inf, utlprm2.inf, and utlprm3.inf, from the installation folder of VSS Provider,
and re-register the disk array system using the GUI tool.
(3) An error occurred in API of the storage management software. For the action to deal with
the occurred error code, ask the storage maintenance personnel to check the output API
return code of the storage management software.
(4) An error occurred when an operation command was given to the disk array system.
See
"About errors attributable to disk array systems" (page
(5) If the problem has not been solved, contact Hewlett Packard Enterprise Support Center.
E100006C
Message
Failed to find any free target index.
Explanation
Failed to create the target because there is no space for it.
Recommended action
Delete an unnecessary target.
86
Troubleshooting
133).
Advertisement
Table of Contents
