E20020D4 - HP XP User Manual

Explanation
Creation of an S-VOL failed
The specified RAID/Parity group does not exist.
Recommended action
(1) Confirm that the RAID/Parity group exist using Storage Management Software. Specify an
existing RAID/Parity group and re-execute.

E20020D4

Message
Creation of S-Vol failed: Insufficient user permissions.
Explanation
Creation of an S-VOL failed.
The user does not have creation authority.
Recommended action
When using Account Authentication, confirm that Storage Administrator (View and Modify)
authority is assigned to the user account. If it is not, assign it.
E20020D5
Message
Creation of S-Vol failed: The LU cannot be created.
Explanation
Creation of an S-VOL failed.
Recommended action
[XP P9500/XP7]
(1) Check if the number of LUs in the disk array system has reached the maximum.
(2) Check if the number of LUs in the RAID/Parity group or THP (Smart) pool has reached
the maximum.
(3) Check if the specified RAID/Parity group or THP (Smart) pool has enough space.
(4) When using Account Authentication, confirm that Storage Administrator (View and Modify)
authority is assigned to the user account. If it is not, assign it.
(5) Confirm the valid/invalid setting of the Password Protection function. If it is valid, change
it to invalid.
(6) Overloaded process may be performed on the disk array system. Confirm the status of
the disk array system and retry after some time.
[XP7]
Confirm and perform the followings using Storage Management Software.
(1)In the case of the virtual DKC, confirm that the virtual LDEV ID which has been assigned
to RSG has some free space.
(2)Confirm whether the state where virtual LDEV ID has not been set to physical LDEV ID
of LDEV to be created (Virtual LDEV ID will be FF:FE) or the reserve state for HA (Virtual
LDEV ID will be FF:FF). If the virtual LDEV ID has not been assigned, assign it.
Error messages 125