Powering On The Printer - Dell 1110 - Laser Printer B/W User Manual

3. Insert the other end of the cable into an available USB port on the computer. Do not use the
USB keyboard port.

Powering On the Printer

CAUTION: The fusing area at the rear part of the inside of your printer becomes hot
once the printer is powered on. Be careful not to be burned when you access this area.
CAUTION: Do not disassemble the printer when it is powered on. If you do, you may
receive an electric shock.
To power on the printer:
1. Plug one end of the power cord into the power cord connector at the back of the printer and
the other end into a properly grounded outlet.
2. Press the power switch to power on the printer.