Table of Contents
Advertisement
5.1.8 Load Setup Defaults
"LOAD SETUP DEFAULTS" loads the values required by the system
for maximum performance.
5.1.9 Integrated Peripherals
Note:
If you enable the IDE HDD block mode, the en-
hanced IDE driver will be enabled.
5.1.10 Password Setting
To change, confirm, or disable the password, choose the "PASS-
WORD SETTING" option from the Setup main menu and press
[Enter]. The password can be at most 8 characters long.
Remember to enable this feature. You must first select the Security
Option in the BIOS FEATURES SETUP to be either "Setup" or
"System." Pressing [Enter] again without typing any characters can
disable the password setting function.
5.1.11 IDE HDD Auto Detection
"IDE HDD AUTO DETECTION" automatically self-detects the hard
disk type.
Figure 5-7: Integrated peripherals
Chapter 5 Award BIOS Setup
55
Advertisement
Table of Contents
