Programming Methods - Intertek 1802 Installation & Owner's Manual

2.2 Programming Methods

The Access Plus system can be programmed from a computer, the system keypad (Keypad on the unit) or from a touch-tone
telephone.
We highly recommend programming the Access Plus system from a computer using the DoorKing Access Plus Management
software as this greatly simplifies the programming task (See section 2.3 for more information). There are also several features
in the Access Plus system that MUST be setup using a computer.
The following features and programming parameters can only be programmed from a computer:
Strike Out: This feature can be turned ON or OFF and will set the number of invalid access codes allowed before the system
shuts down for a period of time. The default is OFF.
Holiday Schedules: Program up to 31 different Holiday schedules. This feature can be turned ON or OFF. The default is OFF.
Email Notification: Set the Access Plus system to send emails to a specified email address on events of your choice. Requires
an Internet connection. This feature can be turned ON or OFF. It comes from the factory with this feature turned OFF (factory
setting OFF). Note: When the mail server uses SSL (Secure link), the unit cannot send e-mails.
Transaction Log: Download and view the system transaction log.
Computer - PC's only, NOT for use with MACs
• This is the preferred method of programming the Access Plus system as it will simplify all of the programming steps
and allow you to enjoy all of the features and benefits available with this system. The Access Plus Management software
must be installed on your computer and the unit must be connected to the computer via one of the methods shown in
section 1.11.2 or 1.11.3. Refer to the Access Plus software help screens for more information.
System Keypad
• We strongly recommend that you become familiar with the entire programming sequence before attempting to program
some of the more complex features of this system using the system keypad. If you make a single error in the program-
ming steps, you will have to re-do the sequence from step 1.
Touch-Tone Telephone
• The programmable features that can be programmed using the system keypad can also be programmed using a touch-
tone telephone from any outside phone line by calling into the Access Plus unit. This method of programming is useful for
programming simple steps or for turning certain features ON or OFF, but is not recommended for complex programming
steps.
32
Direct "System Keypad"
Computer connected directly
to the Access Plus unit or the internet.
1 1 2 2 3 3
NAME CODE
Adams J 1
Bernard E 9
4 4 5 5 6 6
Brown L 5
Davis T 2
Hodges S 4
7 7 8 8 9 9
Miller J 6
Smith K 8
0 0 Thomas W 3
Zimmer R 7
Touch-Tone Telephone.
1810-162-A-6-16