1.1.4 1810 Self-Standing Lighted Kiosk
The flush mount kit (Sold separately, see previous page) is installed into
the self-standing kiosk (P/N 1200-170) to secure the flush mount 1810
in place.
Secure the rough-in box in the kiosk. Run all necessary wires to
rough-in box. Slide the trim ring into the rough-in box. Slide the
enclosure in the trim ring and secure them all together with hardware
included in the kit.
"
6 0
1810-162-A-6-16
P l a
s t i c
T r i
m
R i n
R o
u g
h - I
B o
n
x
L o
c k n
u t
S p
a c e
r
F l u
s h
M o
E n c
u n
l o s
t
u r e
K n
o c k
- o u
t s
g
WARNING!
system is used to control a
vehicular gate with an
automatic gate operator, the
entry system must be
mounted a minimum of ten
(10) feet away from the gate
and gate operator, or in
such a way that a person
cannot operate the entry
system and touch the gate
or gate operator at the same
time.
If this entry
15