Installation - Mercury 40 Service Manual

3. Disconnect oil hose and low oil sensor wires
(BLUE) at bullet connectors. Remove oil reser-
voir.
NOTE: 40/50 H.P. version shown.
a
a - Oil Tank Wires (Light Blue/Black)
b - Oil Hose
4. Remove oil level sensor from oil reservoir.
CAUTION
Oil level sensor is FRAGILE. Handle with care.
b
a - Screw
b - Oil Level Sensor
90-852572R1 JANUARY 1998
55320
b
a
51204

Installation

1. Install oil level sensor and secure in place.
a
a - Oil Level Sensor
b - Screw (Tighten Securely)
2. Connect sensor oil level wires (Light Blue/Black)
at bullet connectors. Re-connect oil hose and se-
cure in place with sta-strap. Install reservoir to
outboard.
NOTE: 40/50 H.P. version shown.
a
a - Oil Level Sensor Wires
b - Oil Hose
b
51204
55320
b
FUEL SYSTEM - 3C-11