Top Cowl Removal And Installation; Cleaning Care For Top Cowl - Mercury 200 OptiMax Manual

NOTE: Engine can be stopped or running at idle speed when
flushing the cooling system. Do not flush engine using a water
system that exceeds 310.26 kPa (45 psi).
1. Remove the plug from fitting in the bottom cowl.
2. Attach a water hose to the fitting. Turn on the water and flush
for 3 to 5 minutes.

Top Cowl Removal And Installation

REMOVAL
1. Release the front and side cowl latches.
2. Lift the top cowl from the outboard.
INSTALLATION
1. Position the top cowl over the engine.
2. Ensure the bottom rubber seal fits properly and lock the front
and side latches.

Cleaning Care for Top Cowl

IMPORTANT: Dry wiping (wiping the plastic surface when it is dry)
will result in minor surface scratches. Always wet the surface
before cleaning. Follow cleaning and waxing procedure.
MAINTENANCE
55
29444
29445
29447