Mercury 40 Service Manual page 336

3. Apply 2-4-C Marine Lubricant to surface of upper
pivot pin, pivot hole and shock rod hole.
4. Position trim into position and drive pivot pin into
swivel bracket and through shock rod until pivot
pin is flush with swivel bracket. Drive trilobe pin
into its hole until seated.
b
95
95
2-4-C w/Teflon (92-850736A1)
a - Trilobe Pin
b - Upper Pivot Pin
5. Connect link rod onto cam lever.
a - Link Rod
b - Cam Lever
5E-6 - MID-SECTION
a
a
b
6. Check manual release cam adjustment. Cam
must open and close freely. Adjust cam link rod
as necessary.
a - Link Rod
b - Manual Release Lever
b
a
90-852572R1 JANUARY 1998