3. Install the two (2) long screws and torque to 100
lb. in. (11 N m).
a - Screw (2) Torque to 100 lb. in. (11 N m)
90-852572R1 JANUARY 1998
Oil Pump Installation
1. Install spring, ball, lubricated o-ring and plastic
seat to manifold.
2. Check to see that o-rings are placed on bottom of
pump.
3. Install filter and filter seal under pump. Install
pump onto manifold. Torque screws to 70 lb. in.
(7.7 N m).
a
51146
a - Screw (3) Torque to 70 lb. in. (7.7 N m)
b - Suction Seat Assembly
b
MID-SECTION - 5D-41
a