Tiller Handle Disassembly - Mercury 40 Service Manual

11. Bend tab washer away form bolt securing shift le-
ver and remove bolt and lever from bracket.
a
a - Tab Washer
b - Bolt
c - Shift Lever
d - Bracket

Tiller Handle Disassembly

1. Using a flat tip screwdriver, carefully pry/push
rubber grip off tiller handle.
b
a - Grip
b - Tiller Handle
2. Remove screw from twist grip.
a - Screw
7B-12 - ATTACHMENTS/CONTROL LINKAGE
d
c
b
51606
51603
a
a
51603
3. Cut sta-strap securing stop switch harness and
remove screw from harness J-clip.
b
a - Sta-Strap
b - Screw
4. Remove stop switch and twist grip from tiller han-
dle.
b
a
a - Stop Switch
b - Twist Grip
5. Remove throttle cable anchor screws and re-
move cable guide.
b
a
a
a - Anchor Screws
b - Throttle Cable Guide
a
51603
51603
51602
90-852572R1 JANUARY 1998