Repeating Defects Check - Lexmark CX725 Service Manual

Action
Step 2
Change the paper size and type, or adjust the size settings in the
tray.
Does the problem remain?
Step 3
Check the paper for texture or rough finish.
Is the paper textured or rough?
Step 4
Replace the textured or rough paper with plain paper.
Does the problem remain?
Step 5
Remove, and then reinstall the fuser. See
page 387.
Does the problem remain?
Step 6
Replace the fuser. See
Does the problem remain?
Step 7
Replace the LVPS. See
Does the problem remain?

Repeating defects check

Action
Step 1
Check the printer rollers for dust or debris.
Are the rollers free of dust or debris?
Step 2
Remove the dust or debris.
Does the problem remain?
Step 3
Measure the distance between the repeating marks.
Is the distance between the marks either 43.9 mm or 45.5 mm?
"Fuser removal" on
"Fuser removal" on page
"LVPS removal" on page
Diagnostic information
Yes
Go to step 3.
Go to step 4.
Go to step 5.
Go to step 6.
Go to step 7.
387.
Contact the next
level of support.
359.
Yes
Go to step 3.
Go to step 3.
Go to step 4.
57
7528
No
The problem is
solved.
Go to step 5.
The problem is
solved.
The problem is
solved.
The problem is
solved.
The problem is
solved.
No
Go to step 2.
The problem is
solved.
Go to step 5.