Maintenance
Inspection guide
Use this guide in identifying the parts that must be inspected, cleaned, or replaced based on the page count.
If any unsafe condition exists, find out how serious the hazard is and if you can continue before you correct the
hazard.
As you service the machine, check for the following:
•
Damaged, missing, or altered parts, especially in the area of the power switch and the power supply
•
Damaged, missing, or altered covers, especially in the area of the top cover and power supply cover
•
Possible safety exposure from any non-Lexmark attachments
Use the following table to determine when specified parts should be inspected:
Lexmark CX725 and XC4150 Every service
Media tray - All
Media tray side guides
Media tray length guides
Transfer module (ITM)
Fuser
Media feeders - All
Media tray pick tires
MPF pick tires
Paper path
Duplex path rollers
Miscellaneous
Toner spillage
Every 150K
call
Inspect
Inspect
Inspect
Replace
Inspect
Replace
Inspect and clean if needed
Inspect and clean if needed
Inspect
Clean
Maintenance
479
Notes
Check for correct positioning
Check for correct positioning
Ensure correct installation
Ensure correct installation
Clean with a damp cloth
Clean with a damp cloth
•
Check for media fragments and tears
•
Check for excessive toner build‑up on white
rollers
•
Clean with damp cloth if needed
Use a toner vacuum and cloth to remove all toner
spillage from the printer
7528