Adf Removal - Lexmark CX725 Service Manual

4
Remove the E‑clip (A), and then remove the outer gear (B).
Installation note: Use the washer in the new gear.
5
Remove the E‑clip (C), and then remove the inner gear (D).
Installation note: Use the washer in the new gear.
ADF and flatbed removals

ADF removal

1
Remove the controller board shield. See
2
Remove the inner controller board shield. See
"Controller board shield removal" on page
"Inner controller board shield removal" on page
Repair information
426
7528
408.
409.