Lexmark CX725 Service Manual page 155

Action
Step 3
Check if the paper size matches the size set on the tray guides.
Does the paper size match the size set on the tray?
Step 4
Replace the paper or change the paper size setting in the tray.
Does the problem remain?
Step 5
Check the paper tray for overfilling.
Is the paper tray overfilled?
Step 6
Remove the excess paper from the tray.
Does the problem remain?
Step 7
Check the paper condition in the tray.
Is the paper crumpled or damaged?
Step 8
Replace the crumpled or damaged paper.
Does the problem remain?
Step 9
Check the tray separator pad for proper installation and damage.
Is the separator pad properly installed and free of damage?
Step 10
Reinstall or replace the separator pad.
Does the problem remain?
Step 11
Check the condition of the tray pick rollers.
Are the pick rollers free from excess wear, contamination, and
damage?
Step 12
Replace the pick rollers.
Does the problem remain?
Diagnostic information
155
Yes No
Go to step 5. Go to step 4.
Go to step 5. The problem is
solved.
Go to step 6. Go to step 7.
Go to step 7. The problem is
solved.
Go to step 8. Go to step 9.
Go to step 9. The problem is
solved.
Go to step 11. Go to step 10.
Go to step 11. The problem is
solved.
Go to step 13. Go to step 12.
Go to step 13. The problem is
solved.
7528