Hard Drive - HP ProBook 6360b Maintenance And Service Manual

Hard drive

NOTE:
All hard drive spare part kits include a hard drive bracket and screws.
Description
750-GB, 7200-rpm hard drive
500-GB, 7200-rpm hard drive
320-GB, 7200-rpm hard drive
320-GB, 7200-rpm hard drive (Self Encrypting Drive)
250-GB, 7200-rpm hard drive
160-GB solid-state drive (SSD)
128-GB solid-state drive (SSD)
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5. Remove the bottom cover (see
Remove the hard drive:
1.
Position the computer upside-down, with the battery bay toward you.
2. Loosen the three Phillips PM2.5×12.0 captive screws (1) that secures the hard drive to the
computer.
3. Grasp the Mylar tab (2) on the hard drive and slide the hard drive to the left to disconnect it from
the system board.
60 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page 50).
Bottom cover on page
Spare part number
633252-001
634926-001
634862-001
641674-001
634861-001
649657-001
649658-001
51).