HP ProBook 6360b Maintenance And Service Manual page 69

4. Use the plastic tab to lift the connector side of the hard drive up at an angle (3) and remove the
drive (4) from the hard drive bay.
5.
If it is necessary to replace the hard drive bracket, remove the four Phillips PM3.0×5.0 hard drive
bracket screws (1) from each side of the hard drive.
6. Lift the bracket (2) straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
Downloaded from LpManual.com Manuals
Component replacement procedures
61