7.
Pull the display assembly out away from the base enclosure and lift the display assembly (1)
straight up and remove it.
CAUTION:
routed out of the display right hinge are routed and arranged properly.
Failure to follow these routing instructions can result in degradation of the computer's WLAN and
WWAN performance.
8.
If it is necessary to replace the display bezel or display hinges, remove the following:
(1) Two rubber screw covers on the display bezel bottom edge
(2) Two Phillips PM2.5×5.0 screws on the display bezel bottom edge
92
Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
When installing the display assembly, be sure that the wireless antenna cables