Select
Port Options
AMT Options
Set Security Level
Restore Security Defaults
116
Chapter 5 Computer Setup
Downloaded from LpManual.com Manuals
To do this
NOTE:
All port options are enabled by default.
●
Enable/disable the serial port.
●
Enable/disable the parallel port.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION:
Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
●
Enable/disable the 1394 port.
●
Enable/disable the ExpressCard slot.
●
Enable/disable the Smart Card reader slot.
●
Enable/disable the eSATA port.
●
Enable/disable Firmware Verbosity.
●
Enable/disable AMT Setup Prompt (Ctrl+P).
●
Enable/disable USB Key Provisioning Support.
●
Enable/disable Unconfigure AMT on next boot.
●
Select Terminal Emulation Mode.
◦
ANSI
◦
VT100
●
Enable/disable Firmware Progress Event Support.
●
Enable/disable Initiate Intel CIRA.
Change, view, or hide security levels for all BIOS menu items.
Restore the default security settings.