Expansion Memory Modules - HP ProBook 6360b Maintenance And Service Manual

Expansion memory modules

NOTE:
There are two memory slots. Expansion memory is installed in a compartment containing a
single slot (slot 2) on the bottom of the computer and the primary memory is installed in a compartment
containing a single slot (slot 1) under the keyboard.
Slot 2 cannot be populated if slot 1 is not populated.
Description
1-GB (PC3-10600, 1333-MHz, DDR3)
2-GB (PC3-10600, 1333-MHz, DDR3)
4-GB (PC3-10600, 1333-MHz, DDR3)
8-GB (PC3-10600, 1333-MHz, DDR3)
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5. Remove the bottom cover (see
Remove the expansion memory module:
1.
Position the computer upside-down, with the front toward you.
2. Spread the retaining tabs (1) on each side of the expansion memory module slot to release the
memory module. (The edge of the module opposite the slot rises away from the computer.)
64 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page 50).
Bottom cover on page
Spare part number
639736-001
621565-001
621569-001
634091-001
51).