Primary Memory Module - HP ProBook 6360b Maintenance And Service Manual

Primary memory module

NOTE:
There are two memory slots. Expansion memory is installed in a compartment containing a
single slot (slot 2) on the bottom of the computer and the primary memory is installed in a compartment
containing a single slot (slot 1) under the keyboard.
Slot 2 cannot be populated if slot 1 is not populated.
Description
1-GB (PC3-10600, 1333-MHz, DDR3)
2-GB (PC3-10600, 1333-MHz, DDR3)
4-GB (PC3-10600, 1333-MHz, DDR3)
8-GB (PC3-10600, 1333-MHz, DDR3)
Before removing the primary memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5. Remove the keyboard (see
Remove the primary memory module:
1. Spread the retaining tabs (1) on each side of the primary memory module slot to release the
memory module. (The edge of the module opposite the slot rises away from the computer.)
74 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page 50).
Keyboard on page 66).
Spare part number
639736-001
621565-001
621569-001
634091-001