HP ProBook 6360b Maintenance And Service Manual page 87

3. Lift the right side of the heat sink (1) to disengage it from the system board.
4. Rotate and lift the heat sink counter-clockwise (2) to clear the base enclosure, and then remove it
from the computer.
NOTE:
time the heat sink is removed. Thermal material is included with all heat sink and processor spare part
kits.
Reverse this procedure to install the heat sink.
Downloaded from LpManual.com Manuals
The thermal material must be thoroughly cleaned from the surfaces of the heat sink (1) each
Component replacement procedures
79