Rtc Battery - HP ProBook 6360b Maintenance And Service Manual

Reverse the preceding procedure to install the system board.

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5.
Remove the following components:
a.
b.
c.
d.
e.
f.
g.
h.
i.
Remove the RTC battery:
1. Position the system board right-side up, with the front toward you.
Downloaded from LpManual.com Manuals
Battery on page
Hard drive (see Hard drive on page
Optical drive (see Optical drive on page
Keyboard (see Keyboard on page
Modem module (see Modem module on page
Fan (see Fan on page 76)
Heat sink (see Heat sink on page
Base enclosure cover (see
Display assembly (see Display assembly on page
System board (see System board on page
50).
60)
57)
66)
72)
78)
Base enclosure cover on page
89)
96)
Spare part number
651038-001
82)
Component replacement procedures
99