Base Enclosure Cover - HP ProBook 6360b Maintenance And Service Manual

Base enclosure cover

All models include the base enclosure cover.
Description
Base enclosure cover
Before removing the base enclosure cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
and the WWAN module (see
6.
Remove the keyboard (see
7. Remove the fan (see
8.
Remove the heat sink (see
Remove the base enclosure cover:
1.
Position the computer right-side up, with the front toward you.
82 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page 50).
WWAN module on page
Keyboard on page
Fan on page 76).
Heat sink on page 78).
WLAN module on page
69).
66).
Spare part number
646076-001
52)