Display Assembly - HP ProBook 6360b Maintenance And Service Manual

Display assembly

All display assemblies include 2 WLAN antenna transceivers and cables, and 2 WWAN antenna
transceivers and cables (select models only).
Description
33.8-cm (13.3-in) HD AntiGlare LED SVA (1366x768) for use in computers without a webcam
33.8-cm (13.3-in) HD AntiGlare LED SVA (1366x768) for use in computers with a WWAN module
and without a webcam
33.8-cm (13.3-in) HD AntiGlare LED SVA (1366x768) for use in computers with a webcam
33.8-cm (13.3-in) LED, FHD for use in computers with a webcam
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Disconnect the wireless antenna cables from the WLAN module (see
and the WWAN module (see
6.
Remove the keyboard (see
7. Remove the base enclosure cover (see
Remove the display assembly:
1.
Position the computer right-side up, with the front toward you.
2. Disconnect the display panel cable (1) from the system board (2).
Downloaded from LpManual.com Manuals
Battery on page 50).
WWAN module on page
Keyboard on page 66).
Base enclosure cover on page
Spare part number
650164-001
650165-001
650166-001
650167-001
WLAN module on page
69).
82).
Component replacement procedures
52)
89