HP ProBook 6360b Maintenance And Service Manual page 114

3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5.
Remove the following components:
a. Hard drive (see
b.
Optical drive (see
c. Keyboard (see
d.
Modem module (see
e.
Fan (see
f. Heat sink (see
g.
Base enclosure cover (see
h. Display assembly (see
i.
System board (see
Remove the RJ-11 connector cable:
1. Position the top cover upside-down, with the front toward you.
2. Remove the RJ-11 connector (1) from the clip built into the top cover.
3. Remove the RJ-11 connector cable from the clips and routing channel (2) built into the top cover.
4.
Remove the RJ-11 connector cable from the top cover.
Reverse this procedure to install the RJ-11 connector cable.
106 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Modem module on page
Fan on page 76)
Heat sink on page 78)
Base enclosure cover on page
Display assembly on page
System board on page
50).
60)
57)
66)
72)
82)
89)
96)