Fan - HP ProBook 6360b Maintenance And Service Manual

Fan

Description
Fan
Before removing the fan, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5.
Remove the bottom cover (see
Remove the fan:
1.
Turn the computer upside-down, with the front toward you.
2. Disconnect the fan cable (1) from the system board.
3. Remove the two Phillips PM 2.5x5.0 screws (2) that secure the fan to the base enclosure.
4. Lift the fan (3) from the base enclosure.
Reverse this procedure to install the fan.
76 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page 50).
Bottom cover on page
Spare part number
639474-001
51).