Utility Disk - Advantech PCM-4862 Manual

All-in-one 486 single board computer with svga, ethernet, and ssd

Hide thumbs Also See for PCM-4862:

Table of Contents

Enlarged version

The PCM-4862 system BIOS and custom drivers are located in a

128 Kbyte, 32-pin (JEDEC spec.) Flash ROM device, designated

U28. A single Flash chip holds the system BIOS, VGA BIOS, and

network Boot ROM image. The display can be configured via

software. This method minimizes the number of chips and eases

configuration. You can change the display BIOS simply by

reprogramming the Flash chip.

The PCM-4862 is supplied with a software utility disk. This disk

contains the necessary file for setting up the VGA display and

Ethernet controller. Directories and files on the disk are as follows:

README.DOC

COOKROM.EXE

DISPLAY (Dir)

COOKROM.EXE

A program that converts application files into binary files (files

with a .BIN extension). These are then written into the SSD Flash

ROM devices.

RSET8019.EXE

This program enables you to view the current Ethernet configura-

tion, reconfigure the Ethernet interface (medium type, etc.), and

execute useful diagnostic functions.

PCM-4862 User's Manual

AWDFLASH.EXE

4862_SYS.BIN

4862_CRT.BIN

4862_TFT.BIN

4862_STN.BIN

4862_ST5.BIN

4862_MON.BIN

4862_EL.BIN

CBROM.EXE

Table of Contents