Wordperfect - Advantech PCM-4862 Manual

All-in-one 486 single board computer with svga, ethernet, and ssd

Hide thumbs Also See for PCM-4862:

Table of Contents

Enlarged version

These drivers are designed to work with WordPerfect 5.0 or 5.1.

They support 132-column display in editing mode, and high-

resolution graphics display in PreView mode.

Step 1: Place the display driver diskette into drive A. Make A the

default drive by typing A: <ENTER>. Run the SETUP program by

typing SETUP <ENTER>. Press any key to display a list of

supported applications. Use the arrow keys to select WordPerfect

and press <ENTER>. A list of supported screen resolutions will be

displayed. Use the arrow keys to select the desired screen resolu-

tion and press <ENTER> (make sure your monitor is able to

display the resolution desired). Press <END> to begin the driver

installation process. A default drive and directory path will be

displayed. Use the backspace key to erase this default and type in

the WordPerfect directory. At this point you may be asked to

create the target directory if it does not already exist. After the

files have been installed, press any key to return to the list of

supported applications. Press <ESC> followed by Y to exit to

DOS.

Step 2: Start WordPerfect, and press <SHIFT>+<F1> to enter the

setup menu. Select D for Display and G for Graphics Screen Type,

and then choose the desired Chips VGA resolution.

PCM-4862 User's Manual

Table of Contents