Driver Installation - Advantech PCM-4862 Manual

These drivers are designed to work with Autodesk AutoCAD R12.
They conform to the Autodesk Device Interface (ADI) for Render-
ing drivers and Display drivers. These display list drivers acceler-
ate redraw, pan, and zoom functions.
Step 1: Place the display driver diskette in drive A. Type A:
<ENTER> to make this the default drive. Type SETUP <ENTER>
to run the SETUP program. Press any key to get to the applications
list. Using the arrow keys, select AutoCAD Release 12 and press
<ENTER>. This will display a list of supported driver resolutions.
Using the arrow keys and the <ENTER> key, select the resolutions
that are appropriate for your monitor. When all of the desired
resolutions have been selected, press <END> to begin the installa-
tion. At this point you will be asked for a drive and directory to
copy the driver files. Enter the drive and directory that contains the
installed AutoCAD R12. If the destination directory does not exist
you will be asked for confirmation. When the installation is
complete, press any key to continue. Press <ESC> followed by Y
to exit to DOS.
Step 2: Go to the AutoCAD directory where the new drivers were
installed and run the driver installation program by typing
ACAD12 -r <ENTER>. This program will configure your
AutoCAD R12 to use the new display drivers. Select TurboDLD
Classic.
Select Configure Video Display. In Display Device Configuration
choose Select Graphics Board/Resolution. Then choose Select
Display Graphics Board. After choosing a graphics board, go to
Select Display Resolution. After selecting the display resolution,
save the new configuration, and return to the main menu.
62 PCM-4862 User's Manual