1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Motherboard
  5. M600
  6. User manual

Advantech M600 User Manual

Onboard intel celeron m 600 ebx sbc with audio,vga ,lcd
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PCM-9586
®
®
Onboard Intel
Celeron
M 600
EBX SBC with Audio,VGA ,LCD
Users' Manual

Advertisement

Table of Contents
loading

Related Manuals for Advantech M600

Summary of Contents for Advantech M600

  • Page 1 PCM-9586 ® ® Onboard Intel Celeron M 600 EBX SBC with Audio,VGA ,LCD Users’ Manual...
  • Page 2 VIA is a trademark of VIA Technologies, Inc. IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation. Intel and Pentium are trademarks of Intel Corporation. Microsoft Windows RTL is a trademark of Realtek Semi-Conductor Co., Ltd. ESS is a trademark of ESS Technology, Inc.

  • Page 3: Packing List

    • 1 Mini Jumper*10 PCS Package (p/n: 9689000002) • 1 ATX power cable (p/n:1700000265) If any of these items are missing or damaged, contact your distributor or sales representative immediately. Model No. List PCM-9586F-M0A1 Description Intel Celeron M 600 M w/Audio/VGA/LCD/CFC...
  • Page 4 This device complies with the requirements in part 15 of the FCC rules: Operation is subject to the following two condi- tions: 1.This device may not cause harmful interference, and 2. This device must accept any interference received, includ- ing interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

  • Page 5: Additional Information And Assistance

    Additional Information and Assistance 1. Visit the Advantech web site at www.advantech.com where you can find the latest information about the product. 2. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: •...
  • Page 6 PCM-9586 User’s Manual...

  • Page 7: Table Of Contents

    Chapter 1 Introduction ...2 Introduction ... 2 Features ... 2 Specifications ... 3 Board layout: dimensions... 5 Chapter 2 Installation ...8 Jumpers... 8 2.1.1 Connectors... 10 Locating jumpers and Connectors... 12 Setting Jumpers ... 14 Clear CMOS (JP3) ... 15 Installing DIMMs...
  • Page 8 2.16 COM port connector (CN11) ... 20 2.17 VGA/LVDS interface connections (CN13, CN16,CN7) 20 2.17.1 CRT display connector (CN13) ... 20 2.17.2 LVDS LCD panel connector (CN16) ... 20 2.17.3 DVI LCD panel connector(CN7)... 21 2.18 TV-out interface (CN12)... 21 2.19 Ethernet configuration (CN2, CN23) ...
  • Page 9 Chapter 5 PCI Graphic Setup...42 Introduction ... 42 5.1.1 5.1.2 5.1.3 5.1.4 Installation of the PCI Graphic driver ... 45 5.2.1 Further Information ... 48 Chapter 6 Audio Setup...50 Introduction ... 50 Driver installation... 50 6.2.1 Chapter 7 PCI Bus Ethernet Interface...54 Introduction ...
  • Page 10 B.16 LCD Inverter Backlight Connector (CN17) B.17 CRT Display Connector (CN13) ... 82 B.18 LVDS Connector (CN16) ... 83 B.19 COM Port Connector (CN11) CompactFlash Card Connector (CN20) ... 85 B.20 GPIO Connector (CN9) ... 86 B.21 TMDS Connector(CN7)... 87 B.22 B.23 Mini PCI Connector ...

  • Page 11: General Information

    General Information This chapter gives background information on the PCM-9586. Sections include: • Introduction • Features • Specifications • Board layout and dimensions Chapter 1...

  • Page 12: Chapter 1 Introduction

    It also provides a convenient connector layout for easy assembly, more efficient cable connections and better overall embedded system integra- tion. 1.2 Features • Embedded Intel • Ultra low power at Celeron • Supports 6 port host USB2.0 • Supports up to 2 channel 36-bit LVDS interface PCM-9586 User’s Manual...

  • Page 13: Specifications

    1.3 Specifications Standard SBC Functions • CPU: Embedded Intel • BIOS: Award 512 KB Flash memory • System memory: Two 184 pin DIMM sockets, support ECC Double Data Rate (DDR)128 MB to 2 GB, accepts 128/256/512/1000 MB DDR200/266 DRAM. • System chipset: 852GM GMCH/ICH4 chipset 400Mhz FSB •...
  • Page 14 VGA/LCD Interface • Chipset: Intel 852GM (Extreme Graphics 2) • Frame buffer: Supports up to 64 MB frame buffer with system mem- • Interface: 4x AGP VGA/LVDS interface • Display mode: CRT Modes: up to 1600 x 1200 at 85-Hz and 2048 x 1536 at 75-Hz •...

  • Page 15: Board Layout: Dimensions

    • Dimensions: (L x W)203 x 146 mm (8" x 5.75") • Power supply Voltage:ATX, with Vcore 2 phase, +5V power only can work • Power Requirement: (Celeron M 600MHz with 256MB DDR266) • Operating temperature:0 ~ 60° C (32~140° F) •...

  • Page 16: Figure 1.2:Board Layout: Dimensions (Solder Side)

    Figure 1.2: Board layout: dimensions (solder side) PCM-9586 User’s Manual...
  • Page 17 Installation This chapter explains the setup proce- dures of PCM-9586 hardware, includ- ing instructions on setting jumpers and connecting peripherals, switches and indicators. Be sure to read all safety precautions before you begin the instal- lation procedure. Chapter 2...

  • Page 18: Chapter 2 Installation

    Chapter 2 Installation 2.1 Jumpers The PCM-9586 has a number of jumpers that allow you to configure your system to suit your application. The table below lists the functions of the various jumpers. Table 2.1: Jumpers Label Function PCI VIO Select RS 232/422/485 Select CMOS Charge &...
  • Page 19 JP2: RS 232/422/485 Select PINS RS-232 Open Open Close Close 8,10 Close 9,11 Open 10,12 Open 13,15 Close 14,16 Close 15,17 Open 16,18 Open RS-232 RS-422 RS-485 RS-422 Open Close Open Open Open Close Close Open Open Close Close 2 ....1 8 ○...

  • Page 20: Connectors

    JP3: COMS Charge & Discharge FUNCTION OFF: Charge* ON: Discharge □ ○ JP4: LVDS Voltage Select FUNCTION VCC3 Default VCC3 2.2 Connectors On-board connectors link the PCM-9586 to external devices such as hard disk drives, a keyboard, or floppy drives. The table below lists the func- tion of each of the board’s connectors.

  • Page 21: Table 2.2:Connectors

    Table 2.2: Connectors Label Function LAN LED GigaLAN Connector Power/LED Header LPT Connector IDE 44Pin Connector IDE 40Pin Connector DF13 20 Pin TMDS Connector FDD FPC 26 Pin Connector GPIO 14Pin Connector CN10 CPU FAN Connector CN11 COM1~4 Connector CN12 TV-OUT Connector CN13 CRT Connector...

  • Page 22: Locating Jumpers And Connectors

    2.3 Locating jumpers and Connectors CN10 Figure 2.1: Jumper & Connector (component side) PCM-9586 User’s Manual CN23 CN27 CN25 CN26 CN11...

  • Page 23: Figure 2.2:Jumper & Connector (Solder Side)

    Figure 2.2: Jumper & Connector (solder side) Chapter 2...

  • Page 24: Setting Jumpers

    2.4 Setting Jumpers You may configure your card to match the needs of your application by setting jumpers. A jumper is a metal bridge used to close an electric cir- cuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 25: Clear Cmos (Jp3)

    2.5 Clear CMOS (JP3) Warning! To avoid damaging the computer, always turn off the power supply before setting “Clear CMOS.” Before turning on the power supply, set the jumper back to “3.0 V Battery On.” This jumper is used to erase CMOS data and reset system BIOS informa- tion.

  • Page 26: Ide, Cdrom Hard Drive Connector (Cn5, Cn6)

    2.7 IDE, CDROM hard drive connector (CN5, CN6) The PCM-9586 provides 2 IDE channels which you can attach up to four Enhanced Integrated Device Electronics hard disk drives or CDROM to the PCM-9586’s internal controller. The PCM-9586's IDE controller uses a PCI interface.

  • Page 27: Floppy Drive Connector (Cn8)

    2.9 Floppy drive connector (CN8) You can attach up to two floppy drives to the PCM-9586’s on-board con- troller. This is useful for notebooks with 26 pin slim-FDD cable (part no:1906000001), for example. You can use any combination of 5.25”(360 KB and 1.2MB) and/or 3.5”(720 KB, 1.44MB, and 2.88 MB) drives.

  • Page 28: Parallel Port Connector (Cn4)

    2.10 Parallel port connector (CN4) Normally, the parallel port is used to connect the card to a printer. The PCM-9584 includes a multi-mode (ECP/EPP/SPP) parallel port accessed via CN4 and a 26-pin flat-cable connector. You will need an adapter cable if you use a traditional DB-25 connector.

  • Page 29: Power Connectors (Cn10,Cn15)

    2.13 Power connectors (CN10,CN15) 2.13.1 ATX power connector, +5V (CN15) Supplies main power to the PCM-9586 (+5V) and to devices that require. 2.13.2 CPU Fan power supply connector (CN10) Provides power supply +12V to CPU cooling fan, and fan speed detects signal input.

  • Page 30: Cd Audio-In Connector (Cn18)

    CRT display connector CN13 are detailed in Appendix C. 2.17.2 LVDS LCD panel connector (CN16) The PCM-9586 uses the Intel 852 GM chipset that supports single- or dual-channel LVDS panel up to UXGA panel resolution with frequency range from 15MHz to 112MHz.

  • Page 31: Dvi Lcd Panel Connector(Cn7)

    plays. Users can connector to either an 18, 24, 36bit LVDS LCD with CN16 2.17.3 DVI LCD panel connector(CN7) Digital Visual Interface (DVI) is the standard interface for high-perfor- mance connection between PCs and Flat Panel Displays, Digital CRT dis- plays, Projectors, and HDTV.

  • Page 32: Network Boot

    2.19.2 Network boot The Network Boot feature can be utilized by incorporating the Boot ROM image files for the appropriate network operating system. The Boot ROM BIOS files are included in the system BIOS, which is on the utility CD disc. 2.20 USB connectors (CN25,CN26,CN27) The PCM-9586 board provides up to six USB (Universal Serial Bus) 1.1/ 2.0 ports.
  • Page 33 Software Configuration This chapter details the software con- figuration information. It shows you how to configure the card to match your application requirements. The AWARD System BIOS is covered in Chapter 4. Sections include: • Introduction • Connections for standard LCDs •...

  • Page 34: Chapter 3 Software Configuration

    Chapter 3 Software Configuration 3.1 Introduction The PCM-9586 system BIOS and custom drivers are located in a 512 Kbyte, Flash ROM device, designated U6. A single Flash chip holds the system BIOS, VGA BIOS and network Boot ROM image. The display can be configured via CMOS settings.

  • Page 35: Connections To Three Standard Lcds

    3.2 Connections to Three Standard LCDs The following tables illustrate typical LCD connection pinouts for the PCM-9586. 3.2.1 LG LM150X06 (1024x768(16 colors) LVDS LCD) Table 3.1: Connections to LCD/ Flat Panel (CN16) LCD Connector Unipac-UB104S01 Signal RxIN0- RxIN0+ RxIN1- RxIN1+ RxIN2- RxIN2+ CKIN-...

  • Page 36: Installing The Csi Utility

    3.3 Installing the CSI Utility Insert the driver CD into your systemís CD-ROM drive. In a few seconds, the cd main menu appears. Move to "\\PCM- 9586\1_FIRST_INST". And click "INFINST_ENU" icon.. Click "Next" when you see the following message. PCM-9586 User’s Manual...
  • Page 37 Click "Yes" when you see the following message. Click "Next" when you see the following message. Chapter 3...
  • Page 38 When the following message appears, click "Finish" to complete the installation and restart Windows. PCM-9586 User’s Manual...

  • Page 39: Award Bios Setup

    Chapter 4 Ducks that Need Love! Award BIOS Setup This chapter describes how to set BIOS configuration data.

  • Page 40: Chapter 4 Award Bios Setup

    Chapter 4 Award BIOS Setup 4.1 System test and initialization These routines test and initialize board hardware. If the routines encoun- ter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal.

  • Page 41: Award Bios Setup

    4.2 Award BIOS setup Award’s BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. 4.2.1 Entering setup Power on the computer and press <Del>...

  • Page 42: Standard Cmos Features Setup

    4.2.2 Standard CMOS Features setup When you choose the Standard CMOS Features option from the Initial Setup Screen menu, the screen shown below is displayed. This standard Setup Menu allows users to configure system components such as date, time, hard disk drive, floppy drive and display. Once a field is high- lighted, on-line help information is displayed in the left bottom of the Menu screen.

  • Page 43: Advanced Bios Features Setup

    4.2.3 Advanced BIOS Features setup By choosing the Advanced BIOS Features Setup option from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the PCM-9586 Series. Figure 4.3: Advanced BIOS Features setup...

  • Page 44: Advanced Chipset Features Setup

    4.2.4 Advanced Chipset Features setup By choosing the Advanced Chipset Features option from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the PCM-9586 Series. Figure 4.4: Advanced Chipset Features setup 4.2.5 Integrated Peripherals Choosing the Integrated Peripherals option from the Initial Setup Screen menu should produce the screen below.

  • Page 45: Power Management Setup

    4.2.6 Power Management Setup By choosing the Power Management Setup option from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the PCM-9586 Series. Figure 4.6: Power Management Setup 4.2.7 PnP/PCI Configurations By choosing the PnP/PCI Configurations option from the Initial Setup Screen menu, the screen below is displayed.

  • Page 46: Pc Health Status

    4.2.8 PC Health Status The PC Health Status option displays information such as CPU and moth- erboard temperatures, fan speeds, and core voltage. 4.2.9 Frequency/Voltage Control By choosing the Frequency/Voltage Control option from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the PCM-9586 Figure 4.8: Frequency/Voltage Control Caution...

  • Page 47: Load Optimized Defaults

    4.2.10 Load Optimized Defaults Load Optimized Defaults loads the default system values directly from ROM. If the stored record created by the Setup program should ever become corrupted (and therefore unusable), these defaults will load auto- matically when you turn the PCM-9586 Series system on. Figure 4.9: Load optimized Defaults 4.2.11 Set Password Note...
  • Page 48 At the “Confirm Password” prompt, retype the desired password, then press <Enter>. Select Save to CMOS and EXIT, type <Y>, then <Enter>. To Change Password Choose the Set Password option from the CMOS Setup Utility main menu and press <Enter>. When you see “Enter Password,”...

  • Page 49: Save & Exit Setup

    4.2.12 Save & Exit Setup If you select this option and press <Y> then <Enter>, the values entered in the setup utilities will be recorded in the chipset’s CMOS memory. The microprocessor will check this every time you turn your system on and use the settings to configure the system.

  • Page 50: Pcm-9586 User's Manual

    PCM-9586 User’s Manual...
  • Page 51 PCI Graphic Introduction Installation of PCI Graphic drivers -for Windows 98/2000/XP Further information Chapter 5...

  • Page 52: Chapter 5 Pci Graphic Setup

    The PCM-9586 has an onboard PCI/AGP flat panel/VGA interface. The specifications and features are described as follows: 5.1.1 Chipset The PCM-9586 uses a Intel 852GM (Extreme Graphics 2) chipset for its graphic controller. It supports LVDS LCD displays, conventional analog CRT monitors, DVI connection, and TV-out function.

  • Page 53: Dual/Simultaneous Display

    5.1.4 Dual/Simultaneous Display The PCM-9586 uses a Intel 852GM controller that is capable of provid- ing simultaneous dual view display of the same content on a flat panel and CRT. To set up dual view (simultaneous mode) under Windows 9x, Windows ME, Windows NT/2000/XP, follow these steps: Step 1.

  • Page 54: Figure 5.1:Selecting Display Settings

    Figure 5.1: Selecting Display Settings PCM-9586 User’s Manual...

  • Page 55: Installation Of The Pci Graphic Driver

    "D" throughout this chapter. 5.2.1 Installation for Windows 98/ME/2000/XP To install PCI Graphic driver for Windows 98/2000/XP, please run the set up wizard "Intel Extreme Graphic 2" in CD-ROM. Example of installation steps is shown as bellow: Chapter 5...
  • Page 56 PCM-9586 User’s Manual...
  • Page 57 Chapter 5...

  • Page 58: Further Information

    5.3 Further Information For further information about the AGP/VGA installation in your PCM- 9586, including driver updates, troubleshooting guides and FAQ lists, visit the following web resources: Advantech websites: www.advantech.com PCM-9586 User’s Manual www.advantech.com.tw...
  • Page 59 Audio Setup The PCM-9586 is equipped with an audio interface that records and plays back CD-quality audio. This chapter provides instructions for installing the software drivers included on the audio driver diskettes. Chapter 6...

  • Page 60: Chapter 6 Audio Setup

    6.1 Introduction The PCM-9586's on-board audio interface provides high-quality stereo sound and FM music synthesis (ESFM) by using the Intel ICH4 audio controller. The audio interface can record, compress, and play back voice, sound, and music with built-in mixer control.
  • Page 61 6.2.2 Windows 9x/2000/Me/XP drivers Step 1. To install Audio driver for Windows 98/2000/XP, please run the set up wizard "Install Shield Wizard for Realtek AC'97 Audio" in CD-ROM. Example of installation steps is shown as bellow. Step 2. In the Hardware Update Wizard window, click "Next". Chapter 6...
  • Page 62 Step 3. In the following Hardware Update Wizard window, click "Fin- ish" for Windows to complete audio driver installation. PCM-9586 User’s Manual...
  • Page 63 LAN Configuration • Introduction • Features • Installation of Ethernet Driver for - Windows 2000 Drivers Setup Steps - Windows NT Drivers Setup Steps -Windows Wake-on-LAN Setup Chapter 7...

  • Page 64: Chapter 7 Pci Bus Ethernet Interface

    100Base-T and 10Base-T compatible. 7.2 Features • Intel 82551 10/100Base-T Ethernet LAN controller • Optional Intel 82541 10/100/1000 Base-T Ethernet LAN controller • Supports Wake-on-LAN remote control function. • PCI Bus Master complies with PCI Rev. 2.2 • Complies with 100Base-TX, and 10Base-T applications.

  • Page 65: Installation For Windows 98&2000

    7.3.1 Installation for Windows 98&2000 a.Select "Start", "Settings". "Control Panel". b. Double click "Network". Click ìAdd new hardware wizardî and prepare to install network function Chapter 7...
  • Page 66 PCM-9586 User’s Manual...
  • Page 67 Choose Hardware Device “Ethernet Controller” Chapter 7...
  • Page 68 Insert the CD into D: drive a. Fill in the Find the LAN chipset folder at the directory of PCM- 9586 win2000 folder from CD ROM drive b. Click “OK”. PCM-9586 User’s Manual...
  • Page 69 Choose the "Intel(R) GD82559ER PCI Adapter" item. Click “Next” Chapter 7...
  • Page 70 a. Make sure the configurations of relative items are set correctly PCM-9586 User’s Manual...

  • Page 71: Further Information

    7.4 Further information Intel website: www.intel.com Advantech websites: www.advantech.com www.advantech.com.tw Chapter 7...
  • Page 72 PCM-9586 User’s Manual...
  • Page 73 Programming the GPIO and Watchdog Timer The PCM-9586 is equipped with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a standstill for any reason. This feature ensures system reliability in industrial standalone or unmanned environments.

  • Page 74: Appendix A Prog. Gpio & W'dog Timer

    Appendix A Prog. GPIO & W’dog Timer A.1 Supported GPIO Register Bellow are detailed description of the GPIO addresses and programming sample. A.1.1 GPIO Registers CRF0 (GP10-GP17 I/O selection register. Default 0xFF) When set to a '1', respective GPIO port is programmed as an input port. When set to a '0', respective GPIO port is programmed as an output port.

  • Page 75: Gpio Example Program-1

    A.1.2 GPIO Example program-1 ------------------------------------------------ Enter the extended function mode, interruptible double-write ------------------------------------------------ MOV DX,2EH MOV AL,87H OUT DX,AL OUT DX,AL --------------------------------------------------------------- Configured logical device 7(GP10~GP17), configuration register CRF0,CRF1,CRF2 --------------------------------------------------------------- MOV DX,2EH MOV AL,07H; point to Logical Device Number Reg. OUT DX,AL MOV DX,2FH MOV AL,07H;...
  • Page 76 OUT DX,AL MOV DX,2FH MOV AL,??H; Put the output value into AL ??H OUT DX,AL ------------------------------------------ Exit extended function mode | ------------------------------------------ MOV DX,2EH MOV AL,AAH OUT DX,AL PCM-9586 User’s Manual...

  • Page 77: Watchdog Programming

    A.2 Watchdog programming Bellow is a sample of programming code for controlling the Watchdog Timer function. ----------------------------------------------------------------------------------- Enter the extended function mode, interruptible double-write | ----------------------------------------------------------------------------------- MOV DX,2EH MOV AL,87H OUT DX,AL OUT DX,AL ----------------------------------------------------------------------------- Configured logical device 8, configuration register CRF6 | ----------------------------------------------------------------------------- MOV DX,2EH MOV AL,07H;...
  • Page 78 MOV DX,2EH MOV AL,F6H OUT DX,AL MOV DX,2FH MOV AL,05H; Set 5 seconds OUT DX,AL ;------------------------------------------ ; Exit extended function mode | ;------------------------------------------ MOV DX,2EH MOV AL,AAH OUT DX,AL PCM-9586 User’s Manual...

  • Page 79: Pin Assignments

    Pin Assignments This appendix provides specialized information regarding: • CPU Fan Power Connector • Ethernet 10/100Base-T Connector • Ethernet 100/1000Base-T Connector • Ethernet LED connector • Audio Connector • Main Power Connector • Keyboard and PS/2 Mouse Connector • Floppy Drive Connector •...

  • Page 80: Appendix B Pin Assignments

    Appendix B Pin Assignments B.1 CPU fan connector (CN10) Table B.1: CPU Fan connector(CN10) Signal +12V SPEED DETECT PCM-9586 User’s Manual...

  • Page 81: Ethernet 10/100Base-T Connector (Cn23)

    B.2 Ethernet 10/100Base-T Connector (CN23) Table B.2: Ethernet 10/100Base-T connector (CN23) Signal VCC_LAN ACTLED LILED Chapter B...

  • Page 82: Ethernet 10/100/1000 Base-T Connector (Cn2)

    B.3 Ethernet 10/100/1000 BASE-T connector (CN2) Table B.3: Ethernet 100/1000-T connector (CN2) Signal RJ45 PIN7 RJ45 PIN8 RJ45 PIN4 RJ45 PIN5 RJ45 PIN3 RJ45 PIN6 RJ45 PIN1 RJ45 PIN2 PCM-9586 User’s Manual...

  • Page 83: Ethernet Led Connector(Cn1)

    B.4 Ethernet LED connector(CN1) Table B.4: Giga bit Ethernet LED (CN1) Signal LINK LINK100 LINK1000 B.5 ACLink audio connector (CN14) Table B.5: Audio connector Signal SPK_R+ SPK_L+ LOUT_R LIN_R Signal SPK_R- SPK_L- LOUT_L LIN_L Chapter B...

  • Page 84: Cd-In Connector (Cn18)

    B.6 CD-IN Connector (CN18) Table B.6: CD-IN Connector (CN18) Signal CD_L CD_R B.7 ATX Main Power Connector (CN15) Table B.7: ATX power connector (CN15) Signal PCM-9586 User’s Manual Signal 5VSB PS-ON#...

  • Page 85: Keyboard And Ps/2 Mouse Connector (Cn19)

    B.8 Keyboard and PS/2 Mouse Connector (CN19) Table B.8: Keyboard and mouse connector (CN19) Signal KB CLOCK KB DATA MS CLOCK MS DATA Chapter B...

  • Page 86: Floppy Disk Drive Connector (Cn8)

    B.9 Floppy Disk Drive Connector (CN8) Table B.9: Floppy Disk Drive Connector (CN8) Signal Vcc (5 V) Vcc (5 V) Vcc (5 V) NC (HD OUT) NC (1.6 MB IN) PCM-9586 User’s Manual Signal INDEX DRIVE SELECT 0 DISK CHANGE NC (READY) MOTOR ON DIRECTION SELECT...

  • Page 87: Ide Hard Drive Connector (Cn5, Cn6)

    B.10 IDE Hard Drive Connector (CN5, CN6) Table B.10: IDE HDD connector (CN5, CN6) Signal Reset DIOW DIOR IORDY DACK IDE IRQ ADDR 1 ADDR 0 HD SELECT0 IDE ACTIVE* Signal IOCS16 ADDR 2 HD SELECT 1 Chapter B...

  • Page 88: Parallel Port Connector (Cn4)

    B.11 Parallel Port Connector (CN4) Table B.11: Parallel Port Connector (CN4) Signal STROBE* ACK* BUSY SLCT * low active PCM-9586 User’s Manual Signal AUTOFD* INIT* SLCTINI*...

  • Page 89: Front Panel Led (Cn3)

    B.12 Front Panel LED (CN3) Table B.12: 1 HDD LED+ Signal HDD LED Power LED+ SUS LED+ LAN ACT+ LAN Link + PWR BTN+ RESET+ Signal HDD LED - POWER LED- SUS LED- LAN ACT- LAN Link - PWR BTN- RESET- Chapter B...

  • Page 90: Usb Connector (Cn25,26,27)

    B.13 USB Connector (CN25,26,27) Table B.13: USB Connector (CN25,26,27) Signal +5 V UV0-/2-/4- UV0+/2+/4+ B.14 SIR Connector (CN24) Table B.14: USB Connector (CN24) Signal IRTX PCM-9586 User’s Manual Signal +5 V UV1-/3-/5- UV1+/3+/5+ Signal IRRX...

  • Page 91: Tv Out Connector (Cn12)

    B.15 TV Out Connector (CN12) Table B.15: TV Out Connector (CN12) Signal CVBS Chapter B...

  • Page 92: Lcd Inverter Backlight Connector (Cn17)

    B.16 LCD Inverter Backlight Connector (CN17) Table B.16: Inverter Backlight Connector (CN17) Signal +12 V ENABKL +5 V B.17 CRT Display Connector (CN13) Table B.17: CRT Display Connector (CN13) Signal GREEN BLUE PCM-9586 User’s Manual Signal DDC POWER(+5V) DDC DATA H-SYNC V-SYNC DDC CLOCK...

  • Page 93: Lvds Connector (Cn16)

    B.18 LVDS Connector (CN16) Table B.18: LVDS Connector (CN16) Signal LCD VDD LCD VDD OD0- OD0+ O31- OD1+ OD2- OD2+ OCK- OCK+ DDC_CLK OD3- OD3+ *LCD voltage setting by jumper 4 Signal LCD VDD LCD VDD ED0- ED0+ ED1- ED1+ ED2- ED2+ ECK-...

  • Page 94: Com Port Connector (Cn11)

    B.19 COM Port Connector (CN11) Table B.19: COM Port Connector (CN11) Signal COM1 DCD COM1 RX COM1 TX COM1 DTR COM2 DCD/485TX- COM2 RX /485TX+ COM2 TX /485RX+ COM2 DTR/485RX- COM3 DCD COM3 RX COM3 TX COM3 DTR COM4 DCD COM4 RX COM4 TX COM4 DTR...

  • Page 95: Compactflash Card Connector (Cn20)

    B.20 CompactFlash Card Connector (CN20) Table B.20: CompactFlash Card Connector (CN20) Signal SDD4 SDD6 SDCS#1 SDA1 SDD0 SDD2 SDD11 SDD13 SDD15 SDIOW IRQ15 CSEL IDERST SDDASP SDD8 SDD10 Signal SDD3 SDD5 SDD7 SDA2 SDA0 SDD1 SDD12 SDD14 SDCS#3 SDIOR SDIORDY S66DET SDD9 Chapter B...

  • Page 96: Gpio Connector (Cn9)

    B.21 GPIO Connector (CN9) Table B.21: GPIO Connector (CN9) Signal GPIO0 GPIO4 GPIO1 GPIO5 GPIO2 GPIO6 GND- GPIO3 GPIO7 PCM-9586 User’s Manual...

  • Page 97: Tmds Connector(Cn7)

    B.22 TMDS Connector(CN7) Table B.22: TMDS Connector(CN7) Signal Signal DVI_CLK DVI_DATA HP_DET MI2C DATA MI2C CLK Chapter B...

  • Page 98: Mini Pci Connector

    B.23 Mini PCI Connector Table B.23: Mini PCI Signal TIP Key 8PMJ-33, 4 8PMJ-63, 4 8PMJ-73, 4 8PMJ-83, 4 LED1_GRNP LED1_GRNN CHSGND INTB# 3.3V RESERVED GROUND GROUND PCM-9586 User’s Manual Signal RING Key 8PMJ-13, 4 8PMJ-23, 4 8PMJ-43, 4 8PMJ-53, 4 LED2_YELP LED2_YELN RESERVED...
  • Page 99 System Assignments This Appendix contains information of a detailed nature: It includes: • System I/O ports • 1st MB memory map • DMA channel assignments • Interrupt assignments Appendix C...

  • Page 100: Appendix C System Assignments

    Appendix C System Assignments C.1 System I/O Ports Table C.1: System I/O Ports Addr. range Device (Hex) 000-01F DMA controller 020-021 Interrupt controller 1, master 040-05F 8254 timer 060-06F 8042 (keyboard controller) 070-07F Real-time clock, non-maskable interrupt (NMI) mask 080-09F DMA page register 0A0-0BF Interrupt controller 2...

  • Page 101: 1St Mb Memory Map

    C.2 1st MB memory map Table C.2: 1st MB memory map Addr. range (Hex) F0000h - FFFFFh *CC000h - EFFFFh C0000h - CBFFFh B8000h - BFFFFh B0000h - B7FFFh A0000h - AFFFFh 00000h - 9FFFFh * If Ethernet boot ROM is disabled (Ethernet ROM occupies about 16 KB) * E0000 - EFFFF is reserved for BIOS POST C.3 DMA channel assignments Table C.3: DMA channel assignments...

  • Page 102: Interrupt Assignments

    C.4 Interrupt assignments Table C.4: Interrupt assignments Interrupt# Interrupt source IRQ 0 Interval timer IRQ 1 Keyboard IRQ 2 Interrupt from controller 2 (cascade) IRQ 3 COM2 IRQ 4 COM1 IRQ 5 COM4 IRQ 6 IRQ 7 LPT1 IRQ 8 IRQ 9 Reserved (audio) IRQ 10...
  • Page 103 Optional Extras for the PCM-9586 Appendix D...

  • Page 104: Appendix D Optional Extras

    Appendix D Optional Extras The PCM-9586 requires several cables for normal operation. You can make them yourself or purchase an optional cable kit assembly, which includes the following: D.1 PCM-10586-6100 Cable kit for PCM-9581F/PCM- 9586F Table D.1: PCM-10586-6100 wiring kit 9581F/9586F Part No.

  • Page 105: Optional Usb Cable (Cn25,26,27)

    D.2 Optional USB cable (CN25,26,27) Optional USB cable (10pin,12cm) D.3 ATX Power Control Cable (CN15) part no.: 1700000265 Part no. 1703100121 Appendix D...
  • Page 106 PCM-9586 User’s Manual...
  • Page 107 Mechanical Drawings Appendix E...

  • Page 108: Appendix E Mechanical Drawings

    Appendix E Mechanical Drawings E.1 Mechanical Drawings CN10 Figure E.1: PCM-9586 Mech Drawing (component side) PCM-9586 User’s Manual CN23 CN27 CN25 CN26 CN11...

  • Page 109: Figure E.2:Pcm-9586 Mech Drawing (Solder Side)

    Figure E.2: PCM-9586 Mech Drawing (solder side) Appendix E...
  • Page 110 PCM-9586 User’s Manual...

This manual is also suitable for:

Pcm-9586

Table of Contents