Advantech PCM-4862 Startup Manual

PCM-4862
486 SBC with VGA/LCD/Ethernet/SSD
Startup Manual

Packing List

Packing List
Packing List Packing List Packing List
Before you begin installing your card, please make
sure that the following materials have been shipped:
• 1 PCM-4862 all-in-one single board computer
• 1 startup manual
• 1 CD-ROM or disk for utilities, drivers, and manual
(in PDF format)
If any of these items are missing or damaged, contact
your distributor or sales representative immediately.
Note: For detailed information on the PCM-4862,
please refer to the enclosed CD-ROM or
disk (in PDF format).
Packing List
For more information on this and other Advantech
products please visit our website at:
http://www.advantech.com
http://www.advantech.com/epc
For technical support and service for please visit our
support website at:
http://support.advantech.com
This manual is for the PCM-4862.
Part No. 2006486210
Printed in Taiwan

Specifications

Specifications Specifications Specifications Specifications
Standard SBC Functions
• CPU: 80486DX/100, DX-133
• BIOS: AWARD 128 KB Flash memory
• Chipset: VIA VT82C496G
• 2nd level cache: On-board 128/512 KB (optional)
• RAM memory: 4 ~ 64 MB. Two 72-pin SIMM
sockets (accept 4/8/16 or 32 MB)
• Enhanced IDE hard disk drive interface: Supports
up to two IDE hard disks. BIOS auto-detect
• Floppy disk drive interface: Supports up to two
floppy disk drives
• Multi-mode parallel port: Configured to LPT1
LPT2, LPT3 or disabled. Supports SPP/ECP/EPP
• Serial ports: One serial RS-232 port, one serial
RS-232/422/485 port. Can be configured as COM1,
COM2, COM3, COM4 or disabled individually. Two
16550 serial UARTs
• Battery: 3.6 V @ 600 mAh lithium battery for up to
10 years of data retention
• Watchdog timer: Can generate a system reset or
IRQ15. Software enabled/disabled. Time interval is
1.6 seconds
• DMA channels: 7
• Interrupt levels: 15
• Keyboard/mouse connector: 8-pin connector
supports standard PC/AT keyboard and a PS/2
mouse
• Power management: I/O peripheral devices
support power saving and doze/standby/suspend
modes. AMP 1.1 compliant
Local-bus Flat Panel/VGA Interface
• Chipset: C&T 65545
• Display memory: 512 KB DRAM (standard), 1 MB
VRAM (optional)
• Display type: Supports CRT and flat panel (EL,
LCD and gas plasma) displays. Simultaneous
display of CRT and flat panel possible
• CRT display mode: Supports resolutions up to 800
x 600 @ 8 bpp (512 K memory) and 1024 x 768 @
8 bpp (1 MB memory)
• Panel display modes: Supports resolutions up to
1st edition
800 x 600 @ 256 colors (1 MB VRAM)
Sep. 1999
PCM-4862 Startup Manual 1