Advantech PCM-4862 Manual page 46

All-in-one 486 single board computer with svga, ethernet, and ssd

Hide thumbs Also See for PCM-4862:

Table of Contents

Enlarged version

The PCM-4862's on-board VGA interface supports a wide range

of popular LCD, EL, gas plasma flat panel displays and traditional

analog CRT monitors. The interface can drive CRT displays with

resolutions up to 1024 x 768 in 256 colors. It is also capable of

driving color panel displays with resolutions of 640 x 480 in 64K

colors. The VGA interface is configured completely via the

software utility, so you don't have to set any jumpers. Configure

the VGA display as follows:

1. Apply power to the PCM-4862 with a color TFT display

attached. This is the default setting for the PCM-4862. Ensure

that the AWDFLASH.EXE and *.BIN files are located in the

working drive.

NOTE:

Ensure that you do not run AWDFLASH.EXE

while your system is operating in EMM386 mode.

2. At the prompt, type AWDFLASH.EXE and press <Enter>. The

VGA configuration program will then display the following:

PCM-4862 User's Manual

Table of Contents