Table of Contents
Advertisement
These drivers are designed to work with Microsoft Word 5.0 and
5.5.
If you have already installed Word on your computer, go to Step 2
to install the new video driver.
Step 1: Install Word as normal.
Step 2: After you complete the Word installation, place the display
driver diskette into drive A. Make A the default drive by typing A:
<ENTER>. Run the SETUP program by typing SETUP <EN-
TER>. Press any key to display a list of supported applications.
Use the arrow keys to select Word and press <ENTER>. Use the
arrow keys to select the desired screen resolution and press
<ENTER> (make sure your monitor is able to display the resolu-
tion desired). Press <END> to begin the driver installation process.
A default drive and directory path will be displayed. Use the
backspace key to erase this and type in your Word directory. After
the files have been installed, press any key to return to the list of
supported applications. Press <ESC> followed by Y to exit to
DOS.
Step 3: Copy the driver file for the desired resolution that was just
installed to SCREEN.VID.
Chapter 5 SVGA Setup
67
Advertisement
Table of Contents
