Table of Contents
Advertisement
4.3
Utility Disk
The PCA-6155V is supplied with software utility disks that hold the
necessary files for setting up the VGA display and Ethernet and
Windows controller. The disks are labeled as follows:
Disk 1:
Disk 2:
Disk 3:
Disk 4:
Disk 5:
Disk 6:
Disk 7:
Total:
4.4
Driver Installation
Necessary prerequisites
The instructions in this manual assume that you understand elementary
concepts of MS-DOS and the IBM Personal Computer. Before you
attempt to install any driver or utility you should: know how to copy
files from a floppy disk to a directory on the hard disk, understand the
MS-DOS directory structure, and know how to format a floppy disk. If
you are uncertain about any of these concepts, please refer to the DOS
or Windows user reference guides for more information before you
proceed with the installation.
Before you begin
Before you begin installing software drivers, you should make a
backup copy of the display driver diskette and store the original in a
safe place. The display driver diskette contains drivers for several
versions of certain applications. You must install the correct version in
order for the driver to work properly so make sure you know which
version of the application you have.
VGA utility for Windows NT
VGA utility for Windows 3.1 English version
VGA utility for OS2 3.0 #1
VGA utility for OS2 3.0 #2
IDE driver
VGA utility for Windows 95
VGA utility for Windows 3.1 Chinese version
7 disks
Chapter 4 PCI SVGA Setup
41
Advertisement
Table of Contents
