Table of Contents
Advertisement
The PCM-4862's PC/104 connectors give you the flexibility to
attach PC/104 expansion modules. These modules perform the
functions of traditional plug-in expansion cards, but save space
and valuable slots. Modules include:
• PCM-3290
• PCM-3810
• PCM-3820
• PCM-3110
• PCM-3111
• PCM-3610
• PCM-3660
• PCM-3718
• PCM-3724
• PCM-3640
• PCM-3680
Installing these modules on the PCM-4862 is quick and simple.
The following steps show how to mount the PC/104 modules:
1. Remove the PCM-4862 from your system paying particular
attention to the safety instructions already mentioned above.
2. Make any jumper or link changes required to the CPU card
now. Once the PC/104 module is mounted you may have
difficulty in accessing these.
3. Normal PC/104 modules have male connectors and mount
directly onto the main card. However, to ensure better bus
matching, the connectors on the PCM-4862 and the PC/104
module are both female. For this reason, you may need to use
the "male-male" adapter included with the PCM-4862 in order
to properly connect your PC/104 module. (Refer to the diagram
on the following page.)
4. Mount the PC/104 module onto the CPU card by pressing the
module firmly but carefully onto the mounting connectors.
5. Secure the PC/104 module onto the CPU card using the four
mounting spacers and srews.
74
PCM-4862 User's Manual
GPS Module
Solid State Disk Module
High Density Flash Disk Module
PCMCIA Module
Secondary PCMCIA Module
Isolated RS-232 and RS-422/485 Module
Ethernet Module
30 KHz A/D Module
48-Channel DIO Module
4-Port RS-232 Module
Dual Port CAN Module
Advertisement
Table of Contents
