Table of Contents
Advertisement
Quick Links
Our company network supports you worldwide with offices in Germany, Austria,
Switzerland, Great Britain and the USA. For more information please contact:
FORTEC Elektronik AG
Hauptniederlassung
Lechwiesenstr. 9
86899 Landsberg am Lech
Telefon:
+49 (0) 8191 91172-0
Telefax:
+49 (0) 8191 21770
E-Mail:
sales@fortecag.de
Internet:
www.fortecag.de
FORTEC Elektronik AG
Büro Wien
Nuschinggasse 12
A-1230 Wien
Telefon:
+43 1 8673492-0
Telefax:
+43 1 8673492-26
E-Mail:
office@fortec.at
Internet:
www.fortec.at
The information contained in this document has been carefully researched and is, to the best
of our knowledge, accurate. However, we assume no liability for any product failures or
damages, immediate or consequential, resulting from the use of the information provided
herein. Our products are not intended for use in systems in which failures of product could
result in personal injury. All trademarks mentioned herein are property of their respective
owners. All specifications are subject to change without notice.
Manual
PCM-9343
Advantech
FORTEC Elektronik AG
Büro West
Hohenstaufenring 55
50674 Köln
Telefon:
Telefax:
E-Mail:
Internet:
ALTRAC AG
(Tochter der FORTEC):
Bahnhofstraße 3
CH-5436 Würenlos
Telefon:
Telefax:
E-Mail:
Internet:
+49 (0) 221 272 273-0
+49 (0) 221 272 273-10
west@fortecag.de
www.fortecag.de
+41 (0) 44 7446111
+41 (0) 44 7446161
info@altrac.ch
www.altrac.ch
Advertisement
Table of Contents
Related Manuals for Advantech PCM-9343
Summary of Contents for Advantech PCM-9343
- Page 1 Manual PCM-9343 Advantech Our company network supports you worldwide with offices in Germany, Austria, Switzerland, Great Britain and the USA. For more information please contact: FORTEC Elektronik AG FORTEC Elektronik AG Hauptniederlassung Büro West Lechwiesenstr. 9 Hohenstaufenring 55 86899 Landsberg am Lech 50674 Köln...
- Page 2 User Manual PCM-9343 3.5" Biscuit with DM&P Vortex86DX- 800 MHz, PC/104 , VGA/TTL/LVDS, LAN, On-board Memory, SATA, USB and CF...
- Page 3 The documentation and the software included with this product are copyrighted 2013 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice.
- Page 4 Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
-
Page 5: Packing List
Packing List Before installation, please ensure the following items have been shipped: Item Part Number 1 PCM-9343 SBC 1 Startup manual 1 Utility CD 1 mini jumper pack Cables Part Number Description 1700008894 SATA cable 30CM... -
Page 6: Table Of Contents
Advanced Chipset Features............22 3.2.5 Integrated Peripherals..............23 3.2.6 PnP/PCI Configurations .............. 24 3.2.7 Load Optimized Defaults............. 25 3.2.8 Set Password................26 3.2.9 Save & Exit Setup ............... 27 3.2.10 Quit Without Saving ..............28 Chapter Extension I/O Installation....29 PCM-9343 User Manual... - Page 7 Table B.2: 1st MB memory map ..........60 DMA channel assignments ..............61 Table B.3: DMA channel assignments........61 Interrupt assignments ................61 Table B.4: Interrupt assignments..........61 Appendix C GPIO & WDT Sample Code ....63 [PCM-9343 WDT]..................64 [PCM-9343 GPIO]................... 65 PCM-9343 User Manual...
-
Page 8: Chapter 1 General Introduction
Chapter General Introduction This chapter gives background information on the PCM-9343. Sections include: Introduction Product feature Specifications... -
Page 9: Introduction
800 MHz SoC. The PCM-9343 has onboard memory up to 256/512MB, supports four USB 2.0 compatible ports, two LAN interface(PCM-9343EFG only), LVDS/TTL/VGA function , and four COM ports. In addition, the PCM-9343 also supports one SATA, one CF slot and one PC/104 expansion. -
Page 10: Specifications
TTL: Supports up to 1024 x 768 @ 24-bit TTL LCD Panel Output Interfaces Dual Display: VGA + LVDS and VGA+TTL, support extended mode and clone mode Note: TTL & LVDS can't output at the same time. PCM-9343 User Manual... -
Page 11: Mechanical Specification
Award 16Mb Flash BIOS via SPI 1.3.2 Mechanical Specification 1.3.2.1 Dimension(mm) L146 mm * W102 mm 1.3.2.2 Height on Top(mm) 14.6 mm (PS/2 Connector) 1.3.2.3 Height on Bottom(mm) 6.70 mm (CF Socket) 1.3.2.4 Weight(g) with Heatsink 132g PCM-9343 User Manual... -
Page 12: Electrical Specification
Operating Humidity:10% ~ 90% Relative Humidity, non-condensing 1.4.0.2 Operating Temperature Operating temperature: 0 ~ 60°C (32~140°F) 1.4.0.3 Storage Humidity Standard products (0 ~ 60°C) Relative Humidity: 95% @ 60°C 1.4.0.4 Storage Temperature Standard products (0 ~ 60°C) Storage temperature: -20~70°C PCM-9343 User Manual... - Page 13 PCM-9343 User Manual...
-
Page 14: Chapter 2 H/W Installation
Chapter H/W installation This chapter explains the setup procedures of the PCM-9343 hard- ware, including instructions on setting jumpers and connecting peripherals, switches, indicators and mechanical drawings. Be sure to read all safety precautions before you begin the installation procedure. -
Page 15: Jumpers
PIN HEADER 3*1P 180D(M) 2.0mm DIP SQUARE W/O Pb Description Setting Function (1-2) +3.3V (2-3) +5V (default setting) Table 2.3: J2: VBR_Ctrl 1653002101 Part Number HD_2x1P_79_D Footprint Description PIN HEADER 2*1P 180D(M)SQUARE 2.0mm DIP W/O Pb Setting Function (1-2) Brightness Control(PWM OUT) (default setting) PCM-9343 User Manual... -
Page 16: Table 2.4: J3: Com2 Setting
PIN HEADER 2*1P 180D(M)SQUARE 2.0mm DIP W/O Pb Description Setting Function (1-2) SATA Master, CF Slave CF Master, SATA Slave (default setting) Note! Recommand to set the CF to Master when using the WinCE with CF card. PCM-9343 User Manual... -
Page 17: Jumper Description
The board provides optional onboard external SPI flash up to 4MB for bootable devices and small storage using DOS Operating System. If required, please contact with Advantech's sales rep to support onboard external SPI flash by request, and fol- lows below steps to enable external SPI flash. -
Page 18: Connectors
2.2.2.2 LPT Connector (CN2) PCM-9343 can support LPT via CN2. LPT (Line Print Terminal) is the original, yet still common, name of the parallel port interface on IBM PC-compatible computers. It was designed to operate a text printer that used IBM's 8-bit extended ASCII character set. - Page 19 The PCM-9343 provides one 6-pin JTAG connector for initial BIOS flash purpose through specific BIOS flash tool. 2.2.2.6 Inverter Power connector (CN7) PCM-9343 can provide +5 V and +12 V and signal to LCD inverter board via CN7. PCM-9343 User Manual...
- Page 20 USB connector. 2.2.2.8 Main power connector, (CN11) PCM-9343 can support 5V AT power supply. Supplies main power +5 V to the PCM- 9343, and to devices that require +12 V. 2.2.2.9 GPIO (General Purpose Input Output) (CN14) The board supports 16-bit GPIO through GPIO connector.
-
Page 21: Mechanical
The CompactFlash card shares a secondary IDE channel which can be enabled/disabled via the BIOS settings. Compact Flash set as fix master mode. Mechanical 2.3.1 Jumper and Connector Location Figure 2.1 Jumper and Connector layout (Component side) PCM-9343 User Manual... -
Page 22: Board Dimension
Figure 2.2 Jumper and Connector layout (Solder side) 2.3.2 Board Dimension Figure 2.3 Board Dimension layout (Component side) PCM-9343 User Manual... -
Page 23: Figure 2.4 Board Dimension Layout (Solder Side)
Figure 2.4 Board Dimension layout (Solder side) Figure 2.5 Board Dimension layout (Coastline) PCM-9343 User Manual... -
Page 24: Chapter 3 Bios Operation
Chapter BIOS Operation... -
Page 25: Bios Introduction
CPUs from 386 through Pentium, AMD Geode, K7 and K8 (including multiple proces- sor platforms), and VIA Eden C3 and C7 CPUs. You can use Advantech's utilities to select and install features that suit your needs and your customers' needs. -
Page 26: Main Menu
Set Password Establish, change or disable passwords. Save & Exit Setup Save CMOS value settings to CMOS and exit BIOS setup. Exit Without Saving Abandon all CMOS value changes and exit BIOS setup. PCM-9343 User Manual... -
Page 27: Standard Cmos Features
Extended Memory The POST of the BIOS will determine the amount of extended memory (above 1 MB in CPU's memory address map) installed in the system. Total Memory This item displays the total system memory size. PCM-9343 User Manual... -
Page 28: Advanced Bios Features
[Disabled] This item enable/disable Blank Boot feature. Boot Safe [Disabled] This item enable/disable Boot Safe function as a “A” drive. Console Redirection [Disabled] This item allows a user to enable / disable console redirection mode. PCM-9343 User Manual... -
Page 29: Advanced Chipset Features
This item allows a user to set VGA related features. ISA Configuration [Press Enter] This item allows users to config ISA resources & IO/MEM wait state. USB Device Setting [Press Enter] This item allows users to set USB related features. PCM-9343 User Manual... -
Page 30: Integrated Peripherals
The BIOS default value is set to "Auto". Master Ultra DMA [Auto] This item allows a user to adjust primary master IDE mode of type for modifica- tion purpose. The BIOS default value is set to "Auto". Slave Ultra DMA [Auto] PCM-9343 User Manual... -
Page 31: Pnp/Pci Configurations
IRQ Resources This item allows assignment of an interruptive type for IRQ-9, 10, 11, 14, and 15. – DMA Resources This item allows you to respectively assign a DMA for 0, 1, 3, 5, 6, and 7. PCM-9343 User Manual... -
Page 32: Load Optimized Defaults
"Load Optimized Defaults" loads the default system values directly from ROM. If the stored record created by the setup program should ever become corrupted (and therefore unusable), select Load Setup Defaults to have these default values load automatically for the next bootup. PCM-9343 User Manual... -
Page 33: Set Password
Select Set Password again, and at the Enter Password prompt, enter the new password and press <Enter>. At the Confirm Password prompt, retype the new password, and press <Enter>. Select Save to CMOS and exit, type <Y>, then <Enter>. PCM-9343 User Manual... -
Page 34: Save & Exit Setup
Select Save to CMOS and exit, type <Y>, then <Enter>. 3.2.9 Save & Exit Setup Note! Typing "Y" will quit the BIOS Setup Utility and save user setup values to CMOS. Typing "N" will return to BIOS Setup Utility. PCM-9343 User Manual... -
Page 35: Quit Without Saving
3.2.10 Quit Without Saving Typing "Y" will quit the BIOS Setup Utility without saving any changes to Note! CMOS. Typing "N" will return to the BIOS Setup Utility. PCM-9343 User Manual... -
Page 36: Chapter 4 Extension I/O Installation
Chapter Extension I/O Installation... -
Page 37: Pc/104
PC/104 Aim the pins to the footprint connector and apply force evenly. After applying force to the connector, the footprint of the connector needs to be inserted correctly. PCM-9343 User Manual... -
Page 38: Installation
Chapter S/W Introduction & Installation... -
Page 39: S/W Introduction
S/W Introduction The mission of Advantech Embedded Software Services is to "Enhance quality of life with Advantech platforms and Microsoft Windows? embedded technology." We enable Windows Embedded software products on Advantech platforms to more effectively support the embedded computing community. Customers are freed from the hassle of dealing with multiple vendors (Hardware suppliers, System integrators, Embedded OS distributor) for projects. -
Page 40: Software Apis
The benefit of using SUSI is portability. The same set of API is defined for different Advantech hardware platforms. Also, the same set of API is implemented in different Operating Systems including Windows XP and Windows CE. -
Page 41: Susi Utilities
Library for developing the applications on Windows XP. Susi.dll Dynamic library for SUSI on Windows XP. \Demo SusiDemo.EXE Demo program on Windows XP. Susi.dll Dynamic library for SUSI on Windows XP. \Demo\SRC Source code of the demo program on Windows XP. PCM-9343 User Manual... - Page 42 Windows CE In windows CE, there are three ways to install the SUSI Library, you can install it manually or use Advantech CE-Builder to install the library or just copy the programs and the library onto a compact flash card.
-
Page 43: Susi Sample Programs
You can click function tabs to select test functions respectively. Some function tabs will not show on the test application if your platform does not support such functions. For a complete support list, please refer to Appendix A. We describe the steps to test all functions of this application. PCM-9343 User Manual... - Page 44 The pin numbers are ordered bit- wise, i.e. bit 0 stands for GPIO 0, bit 1 stands for GPIO 1, etc. For example, if you want to write pin 0, 1, and 3, the pin numbers should be ‘0x0B’. PCM-9343 User Manual...
- Page 45 Key in the register offset in Register Offset field. – Key in the desirous of data in Result field to write to the device. – Click the WRITE A BYTE button and then the data will be written to the device through I PCM-9343 User Manual...
- Page 46 Move the slider in increments, using either the mouse or the direction keys, or click the UP button to increase the brightness. – Move the slider in decrements, using either the mouse or the direction keys, or click the DOWN button to decrease the brightness. PCM-9343 User Manual...
- Page 47 Before the timer counts down to zero, you can reset the timer by clicking the REFRESH button. After you click this button, the Timeout Countdown field will display the value of the SET TIMEOUT field. If you want to stop the watchdog timer, you just click the STOP button. PCM-9343 User Manual...
-
Page 48: Pin Assignments
Appendix PIN Assignments... -
Page 49: Pin Assignments
Table A.1: CN1: SATA 1654004659 Part Number SATA_7P_WATM-07DBN4A3B8UW_D Footprint Description Pin Name Table A.2: CN2: LPT 1653213260 Part Number HD_13x2P_79_BOX Footprint BOX HEADER 13*2P 180D(M) 2.0mm SMD Description Pin Name STROBE# AUTOFEED# ERROR# INIT# SLCT IN# ACK# PCM-9343 User Manual... -
Page 50: Table A.3: Cn3: 24 Bits Ttl Panel
Matching Cable : 1700260250 1700001531 Table A.3: CN3: 24 bits TTL Panel Part Number 1653920200 Footprint SPH20X2 *CONN. 40P 90D 1.25mm SMD WO/Pb DF13-40DP-1.25V Description Pin Name +3.3V +3.3V PD10 PD11 PD12 PD13 PD14 PD15 PD16 PD17 PCM-9343 User Manual... - Page 51 Table A.3: CN3: 24 bits TTL Panel PD18 PD19 PD20 PD21 PD22 PD23 SHFCLK FLM (V-SYNC) M/DE LP (H-SYNC) ENVEE PCM-9343 User Manual...
-
Page 52: Table A.4: Cn4: 24 Bits Lvds Panel
Table A.4: CN4: 24 bits LVDS Panel 1653910261 Part Number SPH10X2 Footprint Description *CONN. SMD 10*2P 180D(M)DF13-20DP-1.25V(91) HRS Pin Name LVDS0_D0+ LVDS0_D0- LVDS0_D1+ LVDS0_D1- LVDS0_D2+ LVDS0_D2- LVDS0_CLK+ LVDS0_D3+ LVDS0_CLK- LVDS0_D3- +5V or +3.3V +5V or +3.3V PCM-9343 User Manual... -
Page 53: Table A.5: Cn5: Com3
1653006101 Footprint HD_6x1P_79_D Description PIN HEADER 6*1P 180D(M) SQUARE 2.0mm Pin Name Table A.7: CN7: Inverter Power Output 1655000453 Part Number WHL5V-2M-24W1140 Footprint WAFER BOX 2.0mm 5P 180D(M) DIP WO/pb JIH VEI Description Pin Name +12V ENABKL PCM-9343 User Manual... -
Page 54: Table A.8: Cn8: Internal Usb
PIN HEADER 2*5P 180D(M) 2.0mm SMD IDIOT-PROOF Pin Name A_D- B_D- A_D+ B_D+ Matching Cable: 1703100121 Table A.9: CN9: Internal USB 1653005260 Part Number HD_5x2P_79_N10 Footprint PIN HEADER 2*5P 180D(M) 2.0mm SMD IDIOT-PROOF Description Pin Name A_D- B_D- A_D+ B_D+ Matching Cable: 1703100121 PCM-9343 User Manual... -
Page 55: Table A.10:Cn10: Isa -5V & -12V Input
HD_3x1P_79_D Footprint Description PIN HEADER 3*1P 180D(M) 2.0mm DIP SQUARE W/O Pb Pin Name -12V Table A.11: CN11: AT Power Input 1655204030 Part Number WF_4P_200_R1_D Footprint Description HOUSING 5.08mm 4P 180D MALE W/O LOCK Pin Name +12V PCM-9343 User Manual... -
Page 56: Table A.12:Cn12: Gpio
PIN HEADER SMD 5*2P 180D(M) 2.0mm Pin Name GPIO4 GPIO0 GPIO5 GPIO1 GPIO6 GPIO2 GPIO7 GPIO3 Table A.13: CN13: PC104 Part Number 00A0000003 165313222A 165312022A Footprint PC104A Description Pin Name IOCHCK IOCHRDY SA19 SA18 SA17 SA16 SA15 SA14 SA13 PCM-9343 User Manual... - Page 57 Table A.13: CN13: PC104 SA12 SA11 SA10 RSTDRV IRQ9 DRQ2 -12V 0WS# +12V SMEMW# SMEMR# IOW# IOR# DACK3# DRQ3 DACK1# DRQ1 REFRESH# SYSCLK IRQ7 IRQ6 IRQ5 IRQ4 IRQ3 DACK2# ALE# PCM-9343 User Manual...
- Page 58 Table A.13: CN13: PC104 BHE# LA23 LA22 LA21 LA20 LA19 LA18 LA17 MEMR# MEMW# SD10 SD11 SD12 SD13 SD14 SD15 MEMCS16# IOCS16# IRQ10 IRQ11 IRQ12 IRQ15 IRQ14 DACK0# DRQ0 DACK5# DRQ5 DACK6# DRQ6 DACK7# DRQ7 MASTER# PCM-9343 User Manual...
-
Page 59: Table A.14:Cn14: Gpio
Table A.14: CN14: GPIO 1653005261 Part Number HD_5x2P_79 Footprint PIN HEADER SMD 5*2P 180D(M) 2.0mm Description Pin Name GPIO4 GPIO0 GPIO5 GPIO1 GPIO6 GPIO2 GPIO7 GPIO3 PCM-9343 User Manual... -
Page 60: Table A.15:Cn15: Smbus
Part Number FPC4V-125M Footprint Description Wafer SMT 1.25mmS/T type 4P 180D(M) 85205-04001 Pin Name SMB_DAT SMB_CLK Table A.16: CN16: BIOS Socket 1651000682 Part Number SOCKET_8P_ACA-SPI-004-K01 Footprint IC SKT 8P SMD WO/Pb C ACA-SPI-004-K01 Description Pin Name HOLD# +3.3V PCM-9343 User Manual... -
Page 61: Table A.17:Cn17: Com4
DCD# DSR# RTS# CTS# DTR# Matching Cable: 1700100250 Table A.18: CN18: LAN2 Part Number 1653205260 Footprint HD_5x2P_79_BOX Description BOX HEADER SMD 5*2 180D (M) 2.0mm Pin Name GNDT GNDT MDI3+ MDI3- MDI2+ MDI2- MDI1+ MDI1- MDI0+ MDI0- PCM-9343 User Manual... -
Page 62: Table A.19:Cn19: Com2
Pin Name DCD# DSR# RTS# CTS# DTR# 422/485TX+ 422/485TX- 422RX+ 422RX- Matching Cable: 1701140201 Table A.20: CN20: LAN1 1652508200 Part Number RJ45_8P_677-088-D06 Footprint PHONE JACK RJ45 8P 90D(F) DIP 677-088-D06 Description Pin Name GNDT GNDT GNDT GNDT PCM-9343 User Manual... -
Page 63: Table A.21:Cn21: Ps2
Description Pin Name KBDAT MSDAT KBCLK MSCLK Matching Cable: 1700060202 Table A.22: CN22: VGA 1654515304 Part Number SUYIN_070207FR015S221CA Footprint D-SUB CONN. 15P 90D(F) DIP 5mm BLUE W/O Pb Description Pin Name GREEN BLUE DDAT HSYNC VSYNC DCLK PCM-9343 User Manual... -
Page 64: Table A.23:Cn23: Com1
Part Number SUYIN_070205MR009S202BA Footprint Description D-SUB CONN 9P 5mm GRN 90D(M) 070205MR009S202BA Pin Name DCD# DTR# DSR# RTS# CTS# Table A.24: CN24: CF 1653050111 Part Number COMPACK-60111220 Footprint Header CFTypeII 50P 90D( M)Standoff2.2mm 60111220 Description Pin Name CS0# PCM-9343 User Manual... - Page 65 Table A.24: CN24: CF CD2# CD1# PCM-9343 User Manual...
-
Page 66: System Assignments
Appendix System Assignments... -
Page 67: System I/O Ports
E0000h - EFFFFh Lower BIOS Area (64kB) 16kB x 41 C0000h - DFFFFh Expansion Card BIOS and Buffer Area (128kB) 16kB x8 A0000h - BFFFFh Standard PCI/ISA Video Memory (SMM Memory) 128kB 00000h - 9FFFFh DOS Area PCM-9343 User Manual... -
Page 68: Dma Channel Assignments
Interval timer IRQ1 Keyboard IRQ2 Interrupt from controller 2 (cascade) IRQ3 COM2 IRQ4 COM1 IRQ5 COM3 IRQ6 COM4 IRQ7 IRQ8 Redirected IRQ2 IRQ9 Reserved IRQ10 Reserved IRQ11 Reserved IRQ12 Reserved IRQ13 Math Coprocessor IRQ14 Fixed Disk IRQ15 Reserved PCM-9343 User Manual... - Page 69 PCM-9343 User Manual...
-
Page 70: Gpio & Wdt Sample Code
Appendix GPIO & WDT Sample Code... -
Page 71: Pcm-9343 Wdt]
69h,al mov al,00h ;count 0 out 6ah,al mov al,00h ;count 1 out 6bh,al mov al,03h ;count 2 out 6ch,al mov al,040h ;enabled WDT function out 68h,al mov ah,4ch int 21 It will reboot after 5 seconds. PCM-9343 User Manual... -
Page 72: Pcm-9343 Gpio]
;Set GPIO data port 1 base address mov al, 0AAh ;Set GPIO 1 of GPIO 1, 3, 5, 7 as high, 0, 2, 4, 6 as low. out dx, al mov ah,4ch int 21 PCM-9343 User Manual... - Page 73 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2013...
- Page 74 Our company network supports you worldwide with offices in Germany, Austria, Switzerland, Great Britain and the USA. For more information please contact: FORTEC Elektronik AG FORTEC Elektronik AG Hauptniederlassung Büro West Lechwiesenstr. 9 Hohenstaufenring 55 86899 Landsberg am Lech 50674 Köln Telefon: +49 (0) 8191 91172-0 Telefon:...