Advantech PCM-4862 Manual page 47

3. At the prompt, type in the BIN file which supports your display.
When you are sure that you have entered the file name correctly
press <Enter>. The screen will ask "Do you want to save?" If
you wish to continue press Y. If you change your mind or have
made a mistake press N to abort and end the setup procedure.
4. If you decide to continue, the program will create a BIOS.OLD
file which contains the existing BIOS configuration. The
prompt will then ask "Are you sure you want to save new
configuration?" Press Y if you want the new file to be written
into the BIOS. Press N to exit the program.
The new VGA configuration will then write to the ROM BIOS
chip. This configuration will remain the same until you run the
AWDFLASH.EXE program and change the settings.
VGA Setup screen
Chapter 3 Software Configuration 39