Installing Accessories - ETC Desire D60 User Manual

Installing Accessories

The accessory holder is equipped with a spring-loaded retaining clip that prevents secondary
lenses and accessories from falling out.
Figure-2.8 Retaining Clip in the Locked Position.
W A R N I N G :
Step 1: Release the retaining clip by pushing it sideways while gently pushing it towards the back
of the fixture.
Step 2: Insert the accessory or secondary lens in either of the two slots.
Step 3: Lock the retaining clip by pushing forward and sliding left as viewing the fixture shown in
Figure-2.8.
N o t e :
For D40 and D40XT, use only secondary lenses or accessories with a 7.5 inch mounting
flange.
36
1
Make sure all accessories are locked into position with the retaining clip
before hanging the fixture.
2
Desire Series v1.4.1 User Manual