Led Settings - ETC Desire D60 User Manual

N O T E :
Once any one of the seven individual color channels is altered from its neutral starting
position, the settings for the original color point may no longer reflect the actual output of
the fixture.
When using RGB, HSI, HSIC, or Studio profile for color selection, each fixture makes
accommodations for the specific LEDs in its array and produces output that is consistent
with other fixtures, whether or not they use LEDs from the same production batch.
Operating with Plus Seven enabled can override this calibration, and multiple fixtures
may produce slightly different outputs when individual color channels are altered from
their neutral starting points.
L E D S e t t i n g s
Use the LED Settings menu to adjust fixture performance. From the LED Settings menu,
you can set the following.
• Output
• Curve
• Output Frequency
• Red Shift
• White Point
Presets and Sequences
Figure-4.10 Selecting LED Settings on the Advanced Menu.
O u t p u t
Use Output to choose the optimal balance between two competing performance
parameters, maximum brightness and output consistency, by adjusting:
• How much the fixture limits the overall power to the LED array.
• How the fixture reduces output as internal fixture components heat up during use or in
high ambient temperatures.
The output options are as follows.
Regulated
Regulated is a moderately constrained power or brightness with consistent output under
typical use. Power to the LEDs is separately regulated in order to maintain consistent
brightness during the initial fixture warm-up period. This is recommended for most indoor
applications.
Protected
Protected provides the most consistent output possible with the greatest potential for
reduced overall brightness. This is best for outdoor use, changing environmental
temperatures, and applications with high requirements for consistency in extreme operating
conditions.
52
Advanced Menu
DMX Settings

LED Settings

Diagnostics
Local Settings
Copy All Settings
LED Settings
Output:
Curve:
Output Freq:
Red Shift:
White Point:
Desire Series v1.4.1 User Manual
Regulated
Standard
1200
Off
3200K