ETC Desire D60 User Manual page 16

Q u i c k S e t u p s ( S t u d i o D a y l i g h t a n d S t u d i o T u n gs t e n )
Step 1:
Step 2:
Step 3:
Step 4:
Quick Setup
Video or film:
The default setting for Studio Daylight,
Studio Tungsten, and Studio HD fixtures.
Studio Quick Setup enables stand-alone
Studio operation from the User Interface on the
back of the fixture if no console is present.
The fixture returns to the General setup
after a reset. For more information, see
Studio Settings, page
Theatrical lighting:
Stage Behaves like a theatrical fixture in control
and dimming performance.
Architectural installations:
Single
Most streamlined settings for applications
Channel
with limited control options.
S t u d i o Q u i c k S e t u p
From the home screen, do any of the following.
• To adjust the Intensity, press [Up] or [Down].
The range is 0 to 100%.
• To adjust the White Point, press [Back] or [Enter].
The range is 2700 to 6500K.
• To adjust the Tint, press [Light bulb] & [Back] or [Enter].
[Back] increases magenta and [Enter] increases green.
• To return to the Main Menu, press [Home].
For advanced settings, refer to the next procedure.
A d v a n c e d S e t t i n g s
Step 1:
Step 2:
Step 3:
Step 4:
Once you are familiar with your Desire fixture, you may alter any of the numerous individual
settings from the Advanced Settings menu. For more information, see
page
10
On the Main Menu, scroll to Quick Setups.
Press [Enter].
Scroll to the desired setup and then press [Enter].
An asterisk (*) next to the setup name indicates that setup is active.
Press [Enter] to return to the home screen.
The top line of the home screen displays the name of the active setup.
Description
74.
From the Main Menu press [Up] or [Down] to select Advanced Settings.
Press [Enter].
Access the individual settings via additional menus.
Press [Enter] to return to the home screen.
48.
Control
Channels
3 –
• Linear dimming curve
Intensity,
• Regulated output for brightness
Strobe, Fan
consistency
Control
• Strobe enabled
(D60 only)
3 –
• Incandescent dimming curve
Intensity,
• Regulated output for brightness
Strobe, Fan
consistency
Control
• Strobe enabled
(D60 only)
• Standard dimming curve
• Regulated output for brightness
1 – Intensity
consistency
• Automatic fan control (D60 only)
Features
Advanced Menu,
Desire Series v1.4.1 User Manual