ETC Desire D60 User Manual page 56

F a n C o n t r o l ( D 6 0 )
Fan Control adds another DMX channel of control when set to DMX. Alternate settings are
Slow, Fast, and Automatic. For more information, see
Step 1:
DMX Start Address:
DMX Profile:
Strobe Mode:
Data Loss:
Fan Mode:
Figure-4.7 Setting the Fan Mode on the DMX Settings Menu.
Step 2:
Step 3:
D a t a L o s s
Data Loss is what happens to the fixture's output when the external control signal (either
DMX or data from the Master fixture in a Master/Slave configuration) is lost. The choices
are as follows:
Instant
As soon as the control signal is lost, the fixture shuts off output and the LED array goes
black.
HLL-2Min
Hold last look for 2 minutes. The fixture retains its last setting for 2 minutes after the control
signal is lost, after which it shuts off output.
Cycling power to the fixture before the 2 minutes have passed will clear the last look and
the LEDs will remain off until control signal is restored.
HLL-4ever
Hold last look forever. After data is lost, the fixture maintains its last look until power is
removed from the fixture or control signal is restored. The last look will not be restored after
power has been cycled.
Step 1:
DMX Start Address:
DMX Profile:
Strobe:
Data
Plus Seven:
DMX Profile:
Figure-4.8 Setting the Data Loss Type on the DMX Settings Menu.
Step 2:
Step 3:
50
On the DMX Settings menu, scroll to Fan.
DMX Settings
Enabled
Instant
6/15 Fan
Press [Enter] to scroll through the available options.
Press [Up] or [Down] to commit the option.
On the DMX Settings menu, scroll to Data Loss.
DMX Settings
Enabled
Loss: Instant
Enabled
2/15 Hue Fine
Press [Enter] to toggle through the three options.
Press [Up] or [Down].
101
Direct
Auto
101
HSIC
6 chan
Fan Control (D60), page
Desire Series v1.4.1 User Manual
33.