ETC Desire D60 User Manual page 68

Rate
Rate is the execution of the Presets' Fade Times and Delay Times within the Sequence,
relative to their settings within the actual Presets. The available Rate range is 2 to 500%.
The default is 100%.
A Rate of 100% represents running the Sequence with timing exactly as specified within
the Presets. A Rate above 100% represents running the Sequence with faster timing than
specified within the Presets. For example, with a Rate of 200%, a Preset with a Fade Time
of 6 seconds would actually be run within the Sequence in only 3 seconds.
A Rate below 100% represents running the Sequence with slower timing than specified
within the Presets. For example, with a Rate of 50%, a Preset with a Fade Time of 6
seconds would actually be run within the Sequence in 12 seconds.
Any change to the Rate is updated live in the fixture memory. Pressing [Back] does not
undo a change to Rate.
Step 1:
Sequence:
Status:
Rate:
Step:
Preset:
Link Time: 00:02
Copy to Other Fixture
Figure-4.24 Selecting Rate on the Sequences Menu.
Step 2:
Step 3:
Step 4:
Step
You enter the number of the step in the sequence to be edited. In our example, you select
step 1. After setting the Preset and Link time, return to Step and select step 2. Repeat this
process until you have entered all the steps in the sequence.
Any change to Step is updated live in the fixture memory. Pressing [Back] does not undo
a change to Step.
Step 1:
Sequence:
Status:
Rate:
Step:
Preset:
Link Time: 00:02
Copy to Other Fixture
Figure-4.25 Selecting Step on the Sequences Menu.
Step 2:
Step 3:
Step 4:
62
On the Sequences menu, scroll to Rate and press [Enter].
Sequences
* 3
Active
100%
01
Press [Up] or [Down] to set the desired percent.
Press [Enter].
Press [Down] to scroll to Step.
On the Sequences menu, scroll to Step and press [Enter].
Sequences
* 3
Active
100%
01
Press [Up] or [Down] to set the desired Step number.
Press [Enter].
Press [Down] to scroll to Preset.
1
1
Desire Series v1.4.1 User Manual