Studio Daylight And Studio Tungsten - ETC Desire D60 User Manual

S t u d i o D a y l i g h t a n d S t u d i o T u n g s t e n
The Studio profile allows quick adjustment of Intensity. The Studio profile can be operated
in a stand-alone mode from the user interface or can be controlled via DMX.
O p e r a t i o n F r o m H o m e S t a t u s S c r e e n ( S t u d i o S t a n d a l o n e )
When operating without an external control signal, the intensity of the white light can be
adjusted immediately and directly by pressing the UI buttons on the fixture while on the
home screen. In this setup, all the UI buttons change their functions from other setups.
Icons on the screen indicate which buttons to use for the settings.
Figure-4.45 Studio Status Home Screen.
• To adjust the Intensity, press [Up] or [Down]. The range is 0 to 100%.
• To return to the Main Menu, press [Home].
• To return to the Studio status screen, from the Main Menu, press [Home] or allow the
UI to time out and automatically return to status screen or press [Back].
S t u d i o D M X C o n t r o l
When controlled via DMX, the channels adjust the following.
76
STUDIO MODE
Intensity = 100%
System OK
1/3 Intensity
Channel
1
2
3
Intensity (Brightness)
Strobe
Fan (D60 only)
Output
Desire Series v1.4.1 User Manual