ETC Desire D60 User Manual page 73

N e t w o r k S t a t i s t i c s
The Network Statistics screen displays the statistics of the network. The DMX input values
dynamically change. This screen is read-only.
Step 1:
Step 2:
Overruns:
Received:
Breaks:
Bad Starts:
DMX Starts:
RDM Starts:
Figure-4.33 Network
Step 3:
Step 4:
T e s t
Test is used to test the fixture and display its output values. Test overrides all other control
to the fixture. The action options are All Off, All On, Chase, and Ind Cntl (Individual control).
The default is All Off.
To exit the Test screen, press [Back] twice. The fixture reverts to the previous control.
Step 1:
Step 2:
LED series
Figure-4.34 Test Screen in Chase Mode.
Step 3:
Step 4:
4
Operation
On the Diagnostics screen, scroll to Network Statistics.
Press [Enter].
When you access the screen, the dynamic values start at 0 and continue to
increase.
Diagnostics
Network Statistics
0
47835
15490
0
27120
0
Statistics Screen with Dynamic Values.
To reset the counters, press [Enter].
Press [Back] to return to the Diagnostics screen.
On the Diagnostics screen, scroll to Test.
Press [Enter].
Action:
Chase:
G O
00 00
With Action selected, press [Enter] to toggle between the options.
Press [Up] or [Down] to commit the option.
Diagnostics
Test
Chase
15 steps/sec
Individual Control
R A O R
48 00 00 00
Brightness
I
00
67