Presets & Sequences - ETC Desire D60 User Manual

W h i t e P o i n t ( V i v i d , L u s t r + , F i r e a n d I c e , S t u d i o H D )
White Point controls the appearance (color temperature) of white-light output when
saturation is at or near zero. This option is available when using the HSI and RGB profiles.
The choices are 2950K, 3200K, 5600K, and 6500K.
Step 1:
Output:
Curve:
Output Freq:
Red Shift:
White
Figure-4.14 Selecting White Point on the LED Settings Menu.
Step 2:
Step 3:
P r e s e t s & S e q u e n c e s
When no external control signal is connected to the fixture, it can be set to run a preset color
mix or a sequence of presets in a stand-alone operation. The Presets and Sequences
screen provides access to the edit screens for Presets and for Sequences, and it indicates
which Preset or Sequence is active, if any. You can access the Presets and Sequences
menu by doing either of the following.
•
•
Figure-4.15 Selecting Presets and Sequences on the Advanced Menu.
F o c u s
Focus is independent of any of the other settings or presets and works whether or not the
fixture is receiving DMX data from a console or is in a Preset or stand-alone state. Focus
stays on until you disable it or power is disconnected. It turns every LED in the fixture on at
70% so you can:
• Focus (aim) the fixture prior to console set-up or when there is no one at the console
to give the fixture intensity.
• Double-check that the fixture is working and that all LEDs are operational.
Step 1:
Step 2:
Step 3:
56
On the LED Settings menu, scroll to White Point.
LED Settings
Regulated
Standard
Point:
With White Point selected, press [Enter] to toggle between the options.
Press [Up] or [Down] to commit the option.
On the Advanced Menu, scroll to Presets and Sequences and press Enter].
From any menu, except when operating in Studio profile, press [Light Bulb].
Advanced Menu
DMX Settings
LED Settings
Presets and Sequences
Diagnostics
Local Settings
Copy All Settings
From the Advanced Menu select Presets and Sequences or press [Light
Bulb].
With Focus selected, press [Enter] to turn the fixture On.
When finished, press [Enter] to turn the fixture Off.
1200
Off
3200K
Presets and Sequences
Focus:
Presets
Sequences
Preset 1 is Active
No Sequence is Active
Desire Series v1.4.1 User Manual
Off