Connections - ETC Desire D60 User Manual

Connections

All connections and user controls are located on the back of the fixture, depending on the
model.
Power In
Power Thru
Figure-2.6 Power and DMX Connections on Back of D40 or D60 Fixture.
Power In
Indicator lights
Figure-2.7 Power and DMX/RDM Connections on Back of the D22 Portable Fixture.
Depending on the fixture model, connect AC input power and DMX data cables to the
appropriate ports. Connect the incoming DMX data cable to the DMX Input connector. If you
are daisy-chaining the data to other fixtures or DMX-controlled devices, connect the next
DMX cable to the DMX Thru connector. Up to 32 fixtures can be connected together into a
data daisy-chain.
For information about the user interface, refer to
26
User Interface Overview, page
Desire Series v1.4.1 User Manual
DMX In
DMX Thru
Indicator lights
DMX/RDM
In
DMX/RDM
Thru
38.